D-Ops
April 2nd, 2010, 05:31 PM
Don't know what you guys will think of this but I tried out the method of dropping pennies behind my trem-block to wedge it solid.
Works great! I gently tapped them down with the plastic handle-end of my screwdriver. I put a couple in the front corners so that the block wouldn't move forward while I tamped them in. It's completely solid.
It took about 5 minutes and cost about 50 cents. And, of course, I can always pull them out with a pair of pliers.
D-Ops
http://debijo77.webs.com/jagPics/pennies.jpg
Works great! I gently tapped them down with the plastic handle-end of my screwdriver. I put a couple in the front corners so that the block wouldn't move forward while I tamped them in. It's completely solid.
It took about 5 minutes and cost about 50 cents. And, of course, I can always pull them out with a pair of pliers.
D-Ops
http://debijo77.webs.com/jagPics/pennies.jpg