PDA

View Full Version : Fret Board and Necks



just strum
February 13th, 2008, 08:21 PM
I have a curiosity question for all you Strat and Strat clone owners out there.

1) What do you prefer - maple or rosewood fret board?

2) What neck (C, V, U...) have you found most comfortable? Why? Are your hands/fingers big or small?

Slowly working my way towards the MIM. I know what model and color, but I would like to hear some preferences on the features noted above.

I'm going to visit a music store to check out different features before I make my decision.

Spudman
February 13th, 2008, 08:33 PM
I really love a maple neck and fingerboard. For some reason my eye sees positions easier and I like the feel. Sadly once the board starts to wear there isn't much maintenance that can be done to it like you can do to a rosewood board.

For best neck shape it would have to be a V type. Specifically the neck on the Musicman Luke guitars. It is amazingly comfortable and very hard to put down after you pick it up. Incredibly comfortable. Too bad they don't make a maple fretboard version of it.

mrmudcat
February 13th, 2008, 08:42 PM
maple, v or c shape,small hands sausage fingers:rotflmao: :thwap:

just strum
February 13th, 2008, 08:46 PM
maple, v or c shape,small hands sausage fingers:rotflmao: :thwap:

I've come to the conclusion the only ones with long fingers are the people that post on youtube. I think it's a pornism thing.

Danzego
February 13th, 2008, 08:51 PM
I don't have very big hands, either. In fact, I can barely make the stretch from the 1st to the 5th fret on Strats. I do find Strat C shaped necks comfortable, though it took me a bit to get used to the Standard radius (9.5") as opposed to the Les Paul radius (12") that I'm used to. I'm also a die hard fan of rosewood. No maple fretboards for me. :)

oldguy
February 13th, 2008, 09:04 PM
Soft V maple, tho I don't mind rosewood, I just think the tinted maple looks cool. I can bend easier on a 12" radius board, but I don't notice a big difference otherwise after playing a few minutes on either.
So many choices, so little time.....money......sigh.:pancake:

just strum
February 13th, 2008, 09:08 PM
I was under the impression that the V shape was for larger hands/fingers, but apparently not. I wish I could remember where I read it. I do remember the article referencing Clapton and Beck, as well as others regarding their preference and why.

Dreadman
February 13th, 2008, 09:23 PM
Hey there Strummy.

I like maple, mostly for appearance reasons but also because they're easier to finish. No masking the fretboard. My hands are about average size and I like thinner necks. Warmoth's "standard thin" (which I think is thinner than any Fenders) is perfect for me, very much like Washburn's acoustic necks (not the bats on the jumbos though).

MIM, huh? May I suggest building from scratch? Between ebay and www.warmoth.com you can put together a killer Strat for as little as $400-$500. My butterscotch baby only cost $700 in parts, all new and very good quality (except the body which is a used USA Fender in like new condition).

If you like the idea I'd be more than happy to help you pick out what you need and guide you through assembly. I'd even build it for you (no charge) if you like.

M29
February 13th, 2008, 09:31 PM
Great post just strum. I was just going to post a question on prefs for shapes. I am looking for a new neck for a project and do not have enough experience playing different shape necks so this post will be great. Thanks:AOK:

I kind of like the '51 neck. It s kind of thick though at the nut.

I also like a 9.5 radius.

My jazzmaster has a flatter compound radius but it makes fretting chords more difficult. The chords in the song Long Train Running are harder to fret on the flatter board. That neck is a standard thin but a compound radius of, 12 to 16. Playing leads is nice though. That also has a PauFerro board which I like a lot.

M29

Dreadman
February 13th, 2008, 09:40 PM
Just for reference here's Warmoths neck profile page. I don't know how they correlate to Fenders but it's something to look at anyway.

http://www.warmoth.com/guitar/necks/necks.cfm?fuseaction=back_profiles

sunvalleylaw
February 13th, 2008, 09:46 PM
I own two strat types, my MIM 60th, and my Fully. I like the Maple modern C shape on my 60th the best. I like the 9.5 radius on the fret board better than the flatter one on the fully, and just like the feel.

Adrian30
February 13th, 2008, 10:39 PM
I have a curiosity question for all you Strat and Strat clone owners out there.

1) What do you prefer - maple or rosewood fret board?

2) What neck (C, V, U...) have you found most comfortable? Why? Are your hands/fingers big or small?

Slowly working my way towards the MIM. I know what model and color, but I would like to hear some preferences on the features noted above.

I'm going to visit a music store to check out different features before I make my decision.

1. Maple, though I'm ready for a guitar with rosewood or ebony fret board.

2. C and soft V, 9.5 radius feel very natural to my average size hands.

Can we hear more about the model and color?

t_ross33
February 13th, 2008, 11:18 PM
I love the maple neck and fretboard on my Tele. A twangin' Tele needs a maple neck for whatever reason - even if it's just to look cool! But I've seen some sweet Teles with rosewood boards too, hmmm...

I'm GASin' for a Strat with r/w, mostly an aesthetic thing for me.

As far as neck shapes, I find Fender types generally more comfy - mine is a "C", and I like the 9.5" radius.

But every once in awhile, my HB-30 calls to me and her 43mm wide, 12.5" radius neck tucks into my hand ever so sweetly, ahhhh...

I just can't make up my mind. Gonna need one of each I guess :AOK:

Katastrophe
February 14th, 2008, 06:10 AM
After years of playing on rosewood fretboards, I got a Strat with maple. It seems to me, and this just may be my ears being goofy, that the maple adds a little snap to the tone.

I am probably one of a very few people that don't like the V neck shape. I played a JV Strat once, and while I loved the tone, the neck just felt awkward to me. I like the C neck shape on the Fender Standards. They are more comfortable to me. I don't have large hands, but I do have semi-long, skinny fingers.

I loved the neck on a '72 Tele Deluxe (or was it Custom? It was the two humbucker version) that I played on a while ago. Perfect fit for my hands, and it felt like a D shape (since it was a 70's model, it probably what Fender calls a U shaped neck). Anyway, it felt good, and I had a blast playing the guitar.

The 9.5" radius is fine. I've never had any problems with chording or bending, and it's a good compromise.

Jimi75
February 14th, 2008, 08:36 AM
I have always preferred maple necks. I love the look and the tone of maple way more than rosewood. In a way it is brighter and I have the impression that one can control the tones and sounds better on a maple fretboard.

Regarding the shape I love v-shaped necks. Got a v-shaped neck on my Jimmie Vaughan Strat and I have never ever felt more comfortable than with the "V". The reason is that I have not the bigest palm, although my fingers are in comparison pretty long, so for my palm the v is just perfect.

Great thread!
:bravo:

marnold
February 14th, 2008, 09:02 AM
I prefer maple, but that's an aesthetic thing. I'd probably prefer ebony to rosewood for the same reason. As far as neck shape goes: flat and thin all the way, baby! My Fender has about the perfect neck for me. Very thin and 15.75" radius. My Floyd is a good middle-ground between my Fender and a typical Fender C-shape. It's got a 12" radius. My '51's neck feels like a baseball bat compared to my Fender.

wingsdad
February 14th, 2008, 09:24 AM
Shape & radius is a 'pesonal feel' thing, but as for the board: Glossed maple. Lacquer. Board & neck.

It's Leo's original 50's design, as he designed the Tele & Strat for Country-Western bar players, with their input & feedback. And part of that is maple's 'snappiness' or briteness vs. rosewood. Less sustain, to a degree, but that's the point. It helps the Strat 'Quack' in the 2 & 4 PUP positions. (that and the middle PUP a shade lower than than either or both the other 2.

a) bends are easier because it's slick
b) doesn't retain grunge
c) low maintenance
d) less wear over time

I've got a 27-year old glossed maple neck on my 81 STRAT. Years of Bar-Wars resulted in a couple of finger board chips and neck dings. They were easy to repair with epoxy fill/stain, and lacquer touch-up.

Heavily-layed areas will wear down the lacquer, but again, it's a simple thing to touch up.

IMO, at least on a Strat or Tele, unfinished/satin necks & boards are a skimpy, cost-saving measure that take less skill to build.

just strum
February 14th, 2008, 12:00 PM
Can we hear more about the model and color?

As soon as I wrap up a possible deal.

marnold
February 14th, 2008, 12:16 PM
IMO, at least on a Strat or Tele, unfinished/satin necks & boards are a skimpy, cost-saving measure that take less skill to build.
I don't think I could disagree with you more on this. I see what you're saying about the durability of a gloss finish, but from a feel perspective, I hate it. During these winter months, it's not a problem. As soon as humidity becomes a factor (and it is in all of the non-cold months here) gloss finishes become far too sticky for my tastes. I would imagine that a good satin finish should be every bit as durable as a gloss one.

That's another reason why I got rid of my Model 7. It had a heavy gloss finish on it that I really didn't like. Having said that, there are plenty of people who value those necks very highly, so different strokes for different folks, I suppose.

Bloozcat
February 14th, 2008, 02:51 PM
I really had to think about this one, because I like a couple of different ones.

The neck profile I find most comfortable is a soft V. But, I like the modern C as well, and even a slightly thicker C shape too.

I have an Alvarez acoustic with a very comfortable neck. I've had the guitar for probably 30 years or more, and didn't realize until I had it for at least 10 of those years, that it has a soft V neck profile. I knew that it felt comfortable, I just didn't realize what it actually was.

As to all maple or maple/rosewood (or other fretboards), I say I probably like the rosewood better, only because I've had so many more of them than maple/maple. But...for a slightly brighter tone, and that vintage amber look, I really like maple/maple. I will say that after years of playing the rosewood boards, the maple boards took some getting used to. I think it was as much a visual thing as feel though...or at least I'd like to believe that.

I have, or have had, neck radii in 7-1/4", 9-1/2", 10", 12", 13-3/4" , 10"-16", and 10"-17". After all of that, I find that I prefer a plain, straight 10" radius (or 9-1/2" which is practically the same). It does everything comfortably for me, from chording to bending.

All I can say in conclusion is, I'm glad I'm not limited to only one...:)

Robert
February 14th, 2008, 03:06 PM
I'm a Maple dude myself. Always liked blondes... :whatever:

Tone2TheBone
February 14th, 2008, 04:25 PM
I like both maple, rosewood. Ebony is nice on a Lester though.

I also like 9.5 and 7.25 radius...both C shape and soft V it don't matter they're all good.

just strum
February 14th, 2008, 06:00 PM
MIM, huh? May I suggest building from scratch? Between ebay and www.warmoth.com you can put together a killer Strat for as little as $400-$500. My butterscotch baby only cost $700 in parts, all new and very good quality (except the body which is a used USA Fender in like new condition).

If you like the idea I'd be more than happy to help you pick out what you need and guide you through assembly. I'd even build it for you (no charge) if you like.


Sounds good, but this might help explain why not at this time.

http://www.thefret.net/showthread.php?t=5744

hubberjub
February 14th, 2008, 06:16 PM
My Strat and my Tele both have maple boards. I would agree that they seem to have a little extra snap to them. Maple boards also look really cool when the finish wears through and the wood starts to discolor. It helps me justify to my girlfriend that I do actually play all of my guitars.

just strum
February 14th, 2008, 06:24 PM
Well, I think maple has won out on my choice. I'll go check out shapes this weekend.

Iago
February 14th, 2008, 08:11 PM
Rosewood. I don't know why.. it's a thing within me since I started playing.. it just looks right and sounds right to me. Just more "charming" if you can say that, the same way I prefer the brunettes. Absolutely nothing against maple.

now talking about radius.. medium to fat C's (you can call it "D shape") and rounder, fatter Vs (unlike the Eric Clapton and Jimmie Vaughan strats). 7,25 on the fretboard.. I'm just so used to it that anything else feels wrong on a Fender. I feel a huge difference when playing different radius of fretboard. The vintage one feels more comfy.

and trust me.. I have hands of a girl, and hate thin necks.. like the MIM standards.

markb
February 14th, 2008, 09:49 PM
All my strats have been c shaped necks with rosewood boards except one. I didn't like that one very much and sold it on pretty quickly.

just strum
February 16th, 2008, 12:38 PM
Well, I visited two music shops today and:

1) It's definitely going to be a maple fingerboard. The feel of that board is incredible.

2) Neither store had a V neck, but I do like the modern C. So if I don't come across a V to try out, I have no concern about the modern C.

3) This is sort of funny and Tot you should get a kick out of this - I've thrown the butt-ugly guitar into the mix. I played this in Candy Apple Red and loved it.

http://www.fender.com/products//search.php?partno=0135300367

4) One of my many Strats being considered is this:

http://www.fender.com/products//search.php?partno=0139502355

Unfortunately it doesn't come in Arctic White or Honey Blonde, so if I go with this I will have to settle on another color.

My little window shopping has stirred up some real serious GAS - something I swore I wouldn't entertain this year. (how many more days until 1/1/09?)

Guitar Gal
February 16th, 2008, 03:48 PM
Strum,

Not sure if you are only looking at Fender products.....but here is one you might like:

http://www.sweetwater.com/store/detail/StratDSMPW/



GG

Dreadman
February 16th, 2008, 04:31 PM
Sounds good, but this might help explain why not at this time.

http://www.thefret.net/showthread.php?t=5744
Very cool. Very cool indeed.

Expensed travel, a factory tour and a potential deal.......tis good to be Strummy.

just strum
February 17th, 2008, 11:05 AM
Any thoughts on these two Strats?

The Roadhouse - Deluxe Series:
http://www.fender.com/products//search.php?partno=0139312380

The Powerhouse - Deluxe Series:

http://www.fender.com/products//search.php?partno=0139502355

tot_Ou_tard
February 17th, 2008, 11:14 AM
3) This is sort of funny and Tot you should get a kick out of this - I've thrown the butt-ugly guitar into the mix. I played this in Candy Apple Red and loved it.

http://www.fender.com/products//search.php?partno=0135300367


I've completely fallen under the charms of the butt-ugly guitar.


I like maple boards with single coils.

I've only played one neck shape, so I'll leave that discussion to others.

warren0728
February 17th, 2008, 11:27 AM
I've completely fallen under the charms of the butt-ugly guitar.


I like maple boards with single coils.

I've only played one neck shape, so I'll leave that discussion to others.
teles will do that to you :AOK:

as for necks to be quite honest i'm not sure what shape and radius the necks on my guitars are....but i did just notice that they are all rosewood except my tele which is maple....the tele is one of my best playing guitars too....but i love my rosewood ones too! :greenguitar:

ww

Danzego
February 17th, 2008, 05:21 PM
Any thoughts on these two Strats?

The Roadhouse - Deluxe Series:
http://www.fender.com/products//search.php?partno=0139312380

The Powerhouse - Deluxe Series:

http://www.fender.com/products//search.php?partno=0139502355


That's going to be a personal call on your part, what with the only effective difference between the two being the pickups (Texas Specials vs. Powerhouse Ultra Quiets). Try 'em out and see which one sounds better to you. I don't know how the Ultra Quiets sound, but if they're anything like the Vintage Noiseless ones, I would end up on the Roadhouse side of the spectrum. :)

sunvalleylaw
February 17th, 2008, 09:25 PM
I vote roadhouse, but mostly because it is very much like my guitar.

mrmudcat
February 18th, 2008, 05:41 AM
yep:bravo:

TS808
February 18th, 2008, 10:26 AM
My preference is a maple fretboard. For one, I love the looks of a maple fretboard and also the little bit of extra "snap" from maple as opposed to rosewood.

Plank_Spanker
February 18th, 2008, 03:52 PM
To be honest, I don't pay attention to any neck profiles. If the neck feels good, it feels good - but I'm not a fan of ball bat necks.

As for boards, I prefer rosewood or ebony. I have a Strat with a maple neck, but I've yet to make peace with it. Maple feels sticky under my fingers.

Must be all of those years playing Gibsons.....................:D

just strum
February 19th, 2008, 05:56 PM
I vote roadhouse, but mostly because it is very much like my guitar.


yep:bravo:

I changed my request to the roadhouse, but I haven't heard back from the guy. Maybe canceling one his purchase orders last week wasn't the best timing:thwap:

oldguy
February 19th, 2008, 07:07 PM
Strum,

Not sure if you are only looking at Fender products.....but here is one you might like:

http://www.sweetwater.com/store/detail/StratDSMPW/



GG

I'm confused...... is the fingerboard a typo? The pic is a maple board..:confused:

* Color: Pearl white
* Body: Basswood
* Neck: Maple
* Fingerboard: Rosewood 9.5" radius (241mm)
* Frets: 21 Medium-jumbo
* Scale length: 25.5" (648mm)
* Width at nut: 1.650" (42mm)
* Hardware: Chrome
* Machine heads: Standard die-cast tuners
* Bridge: Synchronous twin-pivot tremolo
* Pickguard: 3-ply parchment
* Pickups: 3 Duncan Designed™ Single-Coil Pickups
* Pickup switching: 5-position blade
* Controls: Master volume, tone 1, tone 2
* Strings: FENDER® Super 250L, (.009 to .042)

just strum
February 19th, 2008, 07:12 PM
I think it's a typo

http://www.squierguitars.com/products/search.php?partno=0300500523

oldguy
February 19th, 2008, 07:19 PM
Good. I like the maple in the pic.:beer:

just strum
February 19th, 2008, 07:22 PM
Good. I like the maple in the pic.:beer:

It is sweet looking.