Upping the gain on the snake was going to be my next attempt. Because we swap out guitar players from week to week, it means that someone else might be using that same input, so I wanted to see if I...
Type: Posts; User: Eric
Upping the gain on the snake was going to be my next attempt. Because we swap out guitar players from week to week, it means that someone else might be using that same input, so I wanted to see if I...
We have this:
http://www.roland.com/products/en/S-0816/index.html
I thought I read in the manual for it that it had HiZ inputs and LoZ outputs, but maybe I'm wrong.
The DI is 1/4" input, XLR low-impedance, balanced output. I go from that into a high-impedance XLR input on the snake. The other end of the snake (in the sound booth) has a low-impedance output,...
I'll check out the mixer direct-input thing. Good idea.
For the impedance part, I was going through a DI box before the snake, which should drop it down to balanced LoZ, then the snake input was...
Conclusions from today:
1) After we were done playing, I hooked up the pedal-only rig with my friend (the drummer, who I usually discuss this stuff with) with the Behringer HA-400 headphone amp. ...
Well that does help me a good bit as far as troubleshooting is concerned, so I appreciate the input. If I manage to make any headway, I'll update with the results.
Thanks everyone for the help!
I think it's this one:
ART ARTcessories Zdirect Professional Passive Direct Box
I think it's a Mackie SR32-4 mixer.
It's an ART DI with some attenuation pads on it when I use the pedal -> DI box -> mixer, but I don't use a DI box when I use the amp. I just do XLR out on amp...
FWIW, the sound guy says he gets a very low signal from the TM60 as well (I've been using that lately, going XLR out -> FOH), which I thought was very odd. I think that's a separate question really,...
Hmm. My current idea is to use the Behringer headphone amp as a booster before the DI box to give it a little more juice, maybe even taking one of the other headphone channels as a personal monitor,...
After some reading on impedance, I think I'm going to read up on the mixer and see if there's a hi Z phone input for that channel, since my theory is that going line level (lo Z) to XLR in (probably...
It's passive, but the gain needs to be pretty high to get a decent level out of it.
Hi all. Question for the electronics people here...
My question revolves around going DI into the sound board and the resulting levels.
I've tried going guitar -> pedal -> DI box -> FOH a...