Results 1 to 6 of 6

Thread: Remagnetizing an EBO pole block

Hybrid View

  1. #1
    Join Date
    Oct 2007
    Posts
    20
    Post Thanks / Like

    Default

    Thanks Tinman.
    The pole block is laying next to the actual pickup
    on its side to the right .
    It fits in between the 2 coils when assembled.
    s.

  2. #2
    Join Date
    Mar 2009
    Posts
    2
    Post Thanks / Like

    Default

    See if you can un-mount the magnets and recharge them. Before doing that figure out what direction the poles are. If you have a compass aim it at the pickup poles (reassembled) and see what direction it is.

    I am not familiar with the construction of that pickup but I am guessing that there are two magnets under each coil just like a P90 guitar pickup.

    Do you know if they are ceramic or Alnico magnets? If they are ceramic it will much more difficult to recharge them without the proper equipment. Most likely they are Alnico.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •