Your Effects Pedalboard * Pics *

[duhvoodooman***]

Voo - your wish is my command!


Justa - I did the same thing that you mentioned. I used a piece of 1x2 on the top to raise it some from the floor. This board is 1x12 pine and is 36 inches long. I'm not taking it anywhere either so I didn't care about portability. I like having my pedals in line with each other instead of staggered. I get way better signal from the short patch cables. I also took off the little power strip from the old board and attached it to the top of this one so that I'd have even more connections. I run most of the pedals off the TU-2 and I use the old strip for my 1/8" mini connectors (the MXR Micro Amp). I could still put more pedals on there if I wanted to but I still don't want to stagger.


I run a 1 foot patch cable from the looper to the FS-5U switch but it's not there in the photo. Again I attached the pedals to the board with a simple eye hooks and cloth covered rubber band system. Easier for me to disconnect the pedals and they stay on the board without coming off as they did with velcro. I thought about covering the board with some of that material that you talked about Justa but I remember that my other board with the fuzzy velcro material used to get wicked dusty and would stick to the fuzz real bad...that's why I just spray painted it black. Easy to dust off.

Cool! Geez, I gotta make me one of those! I just have everything sitting on the floor in front of my amps. I don't move things around that often, but it's still sloppy looking and a pain everytime I want to juggle positions or put a new pedal in the chain.

BTW, where'd you get that cool yellow one in the middle?? Everybody oughta have one of those!!

[Tone2TheBone]

Cool! Geez, I gotta make me one of those! I just have everything sitting on the floor in front of my amps. I don't move things around that often, but it's still sloppy looking and a pain everytime I want to juggle positions or put a new pedal in the chain.

BTW, where'd you get that cool yellow one in the middle?? Everybody oughta have one of those!!

I think I paid 5 or 6 bucks for the 1x12...3 bucks for the spray paint. I already had pieces of 1x2s laying all over the backyard. I figured out my pedal layout and cut down to 36 inches. Perfect and cheap and it looks good PLUS it will keep your pedals nice and neat. Mine were all over the place too...even when I had the other board. I can still swap out pedals though but at least the current line up will be all on one board. Make one man!

That wicked chicken yellow pedal with the classy blue LED was made by this crazed mad scientist dude. Asked me what I wanted in a pedal and well, he delivered! I figured I better jump on that magical boutique box before the prices went up!