With a chain tool(breaker) you could make as many as youd like.
With a chain tool(breaker) you could make as many as youd like.
Originally Posted by ShortBuSX
Sounds like a good idea to recycle my next bike chain! A little chain cleaner and my chain breaker and you are there! I plan to incorporate that idea into Robert's Samsonite suitcase idea. This is great! Also, I will likely go no fabric and just black paint too, for easy cleaning. Just stick the shop vac hose in there and suck up whatever dust/peanut shells, bottle caps, or whatever ended up in there. Great idea! Can't believe the guy is selling bike chain links on ebay though! LOL!
Steve Thompson
Sun Valley, Idaho
Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
Amphs: Peavey Classic 30, '61 Fender Concert
Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay
love is the answer, at least for most of the questions in my heart. . .
- j. johnson
What's funny is that there will be people that will buy them. How would you secure screws to a Samsonite case?Originally Posted by sunvalleylaw
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz
I will cut a board (ply) to fit like you did, then find some foam to put under the board just for cushioning and over the top of the pedals to close over the top of them when I close it up. I am going to review how Robert set up his, but from memory, that should work.Originally Posted by tone2thebone
Steve Thompson
Sun Valley, Idaho
Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
Amphs: Peavey Classic 30, '61 Fender Concert
Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay
love is the answer, at least for most of the questions in my heart. . .
- j. johnson
Oh I gotcha. I thought you might be screwing directly into the Samsonite sorry.Originally Posted by sunvalleylaw
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz
Something I just thought about is that they will probably rust. Not a lot but they might end up staining your pedals finish. It might be a good idea to ask the guy on ebay if his are rust proof. It seems like there are other brackets out there like this though. A local nuts and bolts company could probably come up with something similar in stainless steel that might still be cheap.
You could also paint them first and they would probably last quite a long time if they were not moved allot.
Just a thought.
M29
Last edited by M29; June 19th, 2007 at 04:45 PM. Reason: Added text.
Looks like more than just bicycle chains, looks like several different types of chain links.Originally Posted by sunvalleylaw
If you are using a new chain, it shouldnt rust...most chains come with a coating to prevent rust, like a gun metal type finish and nicer quality chains will come nickel plated. Id only worry bout rust if you sweat like a heavy rain...but Id worry more about the pedals if that was the case.Originally Posted by M29
PS, when you buy a new bicycle chain, its usually necisarry to cut it down to length to fit...and you usually have a 3" piece left over...perfect for this...you might even talk a bike shop into giving you these scraps for nothin. OR upgrade your kids bike for less than $20 and save the pieces...your kid will be stoaked and your spouse will be none the wiser.
I change out my chain once or twice a season on my MTB. I am sure I could get a supply of the links from the cutting down process. I am now a bit torn about whether I want to screw them down like that, because it is harder to move them around. Also, the connnectors I have probably don't work well with that sort of connection. I may do it to my wah, and hold some of the others down with some sort of bungie or rubber bands like Tone does. Tone, where are you getting you bands and how are you getting the rubber bands through the board? I can't really get an idea of what they look like from your pics.Originally Posted by ShortBuSX
Steve Thompson
Sun Valley, Idaho
Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
Amphs: Peavey Classic 30, '61 Fender Concert
Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay
love is the answer, at least for most of the questions in my heart. . .
- j. johnson
Originally Posted by sunvalleylaw
Ouchless hair bands hold the pedals on the board by attaching to eyelet hooks on either side of each pedal...here is the process.
I got a package of small eyelet hooks like this from Walmart.
Attachment 1160
Then what I did was pry them open just enough to get ouchless rubber bands through them. These are the kind I use. I tried to match the colors of the bands to the pedals but it really doesn't matter.
Attachment 1161
I figured out where I wanted my pedals by connecting the cables to them and setting them side by side. This way I knew exactly how close I could get to each pedal while the cables were connected. Once the pedals were aligned on the board I took a pencil and marked a spot on the board where I could screw in the eyelet hooks on either side of each pedal. I took the pedals off and hand screwed in the eyelet hooks on each mark. I'd do one pedal at a time. When I put the hooks on either side of a pedal location I put the pedal on board and ran the ouchless bands to the hook and pulled them over the pedal. That's it. They stay on really well even when you flip the board upside down and when you want to disconnect the pedals you just pull them from the board and pull the cables. Easy and they're all close together which saves a BUNCH of room on your board. Now granted the bands will cover some of your effects pedal nomenclature on the settings but I already know what the knobs do so it's no biggie. The Cry Baby was attached a little differently in that I ran the bands between the gas pedal and the housing as you obviously can't run them over the top of the wah pedal. Once the pedals are on the board in place and the bands are on you don't even notice the eyelet hooks at all.
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz
Darn good Idea tone... Wal-Mart here I come!!Originally Posted by tone2thebone
Hey, not that I do not believe it... could you make a little AVI movie of you flipping the board.. just for testing purpose?
Jimmie Vaughan Strat , Squire 51
Epi 56 GoldTop, SX "Vintage" Jazz Bass
Zager 50, Guild GAD30R (Excellent)
G-Dec 3 Thirty, Valve Junior & Cab
Crate PowerBlock, Crate V33H
Avatar Cabinet 2x12 Hellatones
JamVox, Studio GX With Mods/Farm 2.0.
Good idea. I'll have my daughter video me doing that just for you.Originally Posted by Justaguyin_nc
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz