do you mean something to switch between presets on the pod? something like the FBV Express or something?
or are you talking about pedals to accompany your pod?
Hey!
I have a marshall (50W) and a pod 2.0. I am planning to expand alittle bit, and need some pedals to manouvere my preseets on my pod. I also miss a booster pedal.
Do you guys have anything to recomend?
B
do you mean something to switch between presets on the pod? something like the FBV Express or something?
or are you talking about pedals to accompany your pod?
Guitars: Epiphone Elitist LP Custom, Ibanez Talman TC420, Guitar built by yours truly
Pedals: Digitech DF7, Digitech EX7, Ibanez WH10, ZVEX Fuzz Factory, EHX The Worm, Arion DDM-1, Digitech XBW
Amp: Marshall MG100HDFX + MG412
www.myspace.com/ragnarpk
I was actually thinking of something to switch between presets on the pod, but I`m happy for other suggestions as well.
I`m connecting my pod through the "return" on the back of the amp. Can I connect other kind of pedals when I`m using the pod this way?
As mentioned I really miss a booster option, but I can`t say I`ve seen anything like that for the Pod.
B
well if you have them connected in series, you can just have your whole rig go in to the return.
and i mentioned the FBV, does that thing not switch between presets? all i know is that its compatible with the pod, not sure what all the buttons do exactly.. you might wanna look into it.
and as for a booster, i'm not into that whole thing, i'm sure some of the regulars will come running with suggestions soon enough..
and you might wanna get a wah, every guitarist needs one you might want a crybaby, or one of the vox's or maybe an ibanez. the wh10 is incredible, if you can find one
Guitars: Epiphone Elitist LP Custom, Ibanez Talman TC420, Guitar built by yours truly
Pedals: Digitech DF7, Digitech EX7, Ibanez WH10, ZVEX Fuzz Factory, EHX The Worm, Arion DDM-1, Digitech XBW
Amp: Marshall MG100HDFX + MG412
www.myspace.com/ragnarpk
Check out Line 6 products here. There are floor boards that work with the POD. Yes they all allow you to change presets. For a boost pedal I would just add a pedal between your guitar and POD for boosts. Maybe an EQ pedal or Overdrive or clean boost pedal.
"No Tele For you." - The Tele Nazi
Ha! Tele-ish now inbound.
I have a POD II as well. As far as I can tell they require the Line6 pedalboards, which is a bit of a PITA.
Guitars: Epiphone SG-400 Custom; Epiphone Firebird V; 1996 Gibson LP Standard; Avion 4; Yamaha FG-301B acoustic
FX: TS-808; Big Muff (Triangle Version); Red Llama; Green Ringer Octave Up (Clones); Maxon Phaser; Maxon Compressor; Tremulus Lune Tremolo; Line 6 POD II
Amp: (Somewhere in another country) Hiwatt 100W head, Marshall 4x12 cab
My noise here
Midi can work for some things but it won't give you total control. Probably just program changes and if that is all you need then a basic midi control pedal would work. The POD has midi.
"No Tele For you." - The Tele Nazi
Ha! Tele-ish now inbound.
Thanks. Now I just have to find my perfect rig. I don`t know very much about these things, so I just have to experiment a bit.
Do you have any specific booster pedal to recomend? I play stuff like Stones, Zeppelin and White Stripes.. And love to just push that button for hard riffing and solos..
A Digitech Bad Monkey or one of the Danelectro Cool Cat pedals, the Drive or Transparent Overdrive all make great inexpensive boost/overdrive pedals that would work for what you want.
"No Tele For you." - The Tele Nazi
Ha! Tele-ish now inbound.