I wanted to see what happened to the tone if I took the back off, so I did.
The sound improved a bit. Not a huge thing, but it sounds more open and airy now. The combo is also a bit lighter, which doesn't hurt!
I'll post some pics later.
I wanted to see what happened to the tone if I took the back off, so I did.
The sound improved a bit. Not a huge thing, but it sounds more open and airy now. The combo is also a bit lighter, which doesn't hurt!
I'll post some pics later.
The Law of Gravity is nonsense. No such law exists. If I think I float, and you think I float, then it happens.
Master Guitar Academy - I also teach via SKYPE.
Robert - I hope the AD50VT does not have as much excess glue as do the newer AD15VT and AD30VT VOX amps. The extra glue is to help the input jack assembly from falling into the cabinet. It is considered a modification. When I re-installed the jack on my amp I took a closer look at the input jack. It hard for me to comprehend that the economical plastic box and nut assembly presently used is much cheaper than the all metal 2 prong jack from the old days. The next time I have trouble with the plastic input jack, it will be replaced with the old reliable metal jack.
Another interesting thing about the AD15VT and AD30VT is the pressed wood used for the cabinet. This defiantly contributes to the weight of the cabinet and I believe is a factor in the “blanket effect” I talked about in an earlier post. If I was any good working with wood, I would modify the back panel and have a partially open back cabinet. I agree that an open back allows the tones to improve.
Guitars:
Electric: Washburn HB-30, Squier Tele Custom Deluxe, Jay Turser Strat.
Acoustic: Seagull S6.
AMPs: VOX AD30VT, Peavey Envoy 110.
Modelers: V-AMP 2, Digitech RP-100A.
Pedals: Boss RC-2 Loop Station, Boss CE-5 Chorus Ensemble, Digitech Bad Monkey, Ibanez DE7 Delay/Echo, DOD VFX40B 7-Band Graphic EQ, Ibanez CS-5 Super Chorus.
My Fender Hot Rod DeVille has a slab of steel in the bottom of the cabinet. I believe this is done to help improve the tone with a greater amount of mass.
Or they have a back room deal the chiropractic industry.
"It's funny the way most people love the dead. Once you are dead, you are made for life." - Jimi Hendrix
That is one HEAVY amp. I had a 212 HR Deville and traded it...just too darn loud (and heavy)!. The slab of steel at the bottom, is that the reverb tank, or is there another steel component? I just remember the reverb tank being there, and that was pretty big.Originally Posted by tremoloman
Guitars: 2003 and 2004 American series strats, Squier Classic Vibe 50's Strat, Squier Deluxe Strat.
Amps: Line 6 Spider IV 120, Vox AD50VT 212, and Peavey Transtube Bandit 112.
Pedals: Digitech Bad Monkey.
The AD100VT is open back, probably due to the bass response from the two speakers as it is. Now that I've found alot of the sweet spots on the EQ for the different models, I'm noticing that the amp really has "opened up" with some top end brilliance. Alot of the amp models on the 100VT are pretty "bass heavy" as it is, more than likely due to the cabinet modeling, so an open back cab probably will help with the AD50VT.Originally Posted by Robert
The open back on the AD50VT should also provide some nice tones.
Guitars: 2003 and 2004 American series strats, Squier Classic Vibe 50's Strat, Squier Deluxe Strat.
Amps: Line 6 Spider IV 120, Vox AD50VT 212, and Peavey Transtube Bandit 112.
Pedals: Digitech Bad Monkey.