The Boss switch mode adapters are 500ma. Definitely enough power for those pedals. Mine does a wah, tuner, SD-1, Marshall trem and DD-3. Just get a suitable daisy chain. My effects are rarely all turned on at once.
Sorry if this sounds like a dumb question but I've searched everywhere and can't seem to find a answer.
I was wondering if the Boss PSA-120s adapter can power 3 Boss pedals and a Dunlop CryBaby. The other pedals are a TU-2 (using as power source) BD-2 and a DS-1. If so do i connect it to the daisy chain or do I just keep it connected via the instrument/patch cable?
Any help would be greatful.
Thanks
May you be a half an hour in Heaven before the Devil knows you're dead!
The Boss switch mode adapters are 500ma. Definitely enough power for those pedals. Mine does a wah, tuner, SD-1, Marshall trem and DD-3. Just get a suitable daisy chain. My effects are rarely all turned on at once.
Electric: Fat strat > Korg PB > TS7 > DS1 > DD-20 > Cube 60 (Fender model)
Acoustic: Guitar > microphone > audience
Well I have two boss chains one that came with the BCB 30 and a 7 pedal chain so I should be good there. I did check and from what I saw I should be ok but just wanted to check to make sure. My FXs are rarely turned on at once as well.
May you be a half an hour in Heaven before the Devil knows you're dead!