I have had some experience with clear coat auto finishes. From what I can see it looks as if this is a fine rubbing compound and then a polishing compound. It is better known as swirl remover. What you are actually doing is polishing out and levelling the coating on the guitar. The second one takes out any fine scratches and is a glaze.
This is some wax filling as well and the scratches will be there but be less noticable for a while. When the wax wears off you will see them. It all depends on how deep they are and how much you buff them with the initial compound.
I use similar products on my Muscle cars but I use a buffer.
The Blues is alright!
Guitars: 1968 Gibson SG, 2005 Gibson SG Standard, 2006 Gibson LP Classic Gold top, 2004 Epiphone Elitist LP Custom, 1996 Gibson Les Paul Standard. 2001 Epiphone Sheraton II, 2007 Epiphone G400.
Fender Strats: 1996 Fender 68 Reissue CIJ, 2008 Squier CV 50s, 2009 Squier CV 50s Tele Butterescotch Blonde
Amps: Blues Junior Special edition Jensen in Brown Tolex with Wheat front, 65 Deluxe Reverb reissue,1970 Sonax reverb by Traynor, Avatar Custom 2/12 Cabinet with Eminence Legend V1216 speakers,
2008 DSL100 Marshall Amp , Fender Super Champ XD,Fender Vibro Champ XD
Effects and Pedals: Fulltone Fulldrive II, Fulltone OCD, Fulltone Mini Deja Vibe, Fulltone Fat Boost, Dunlop Crybaby Wah, Boss DS1, Boss DD20 Giga Delay, Boss TU2 tuner, Boss BD2, Ibanez TS9 Tube screamer, Zoom 505. Radial tonebone hot british.