Sounds like static electricity build up on the pickguard. Other than shielding the pickguard and connecting the shielding to ground, I've heard that "static-guard" type wipes can help... maybe...
I have been finding that my CV tele emits random snaps and pops, varying in volume and intensity, appearing randomly during playing. If I sit and damp the strings with the left hand, nothing, but while playing they appear, but not connected with anything like note attack or moving the cord. This happens with the VT30 and ALSO when playing through a modelled amp in the computer. I did perform a wiring mod some months ago, and everything works as it should otherwise. IF I switch guitars in any of these set-ups, no more pops. Any ideas?
"GAS never sleeps" - Gil Janus
"Now you got to pay your dues. Get that axe and play the blues." - Spudman
Gear: Epiphone Sheraton II, Epiphone Wildkat, Epiphone Emperor Joe Pass, Fender MIM Strat, Tacoma DR-14, Johnson JR-200 resonator; Fender Super Champ XD amp
Sounds like static electricity build up on the pickguard. Other than shielding the pickguard and connecting the shielding to ground, I've heard that "static-guard" type wipes can help... maybe...
Electrics: Hagstrom Ultra Swede (Gold Eagle Burst) Gretsch 5120 Electromatic (Orange) Custom Nashville Blackout Telecaster (Black, Stat mid/neck p'ups; Lil Puncher (Modern Vintage) bridge p'up; Wilkinson Compensated Bridge w/ 3 brass saddles, Warmoth Vintage Modern Birdseye Maple Neck) Fender MIM Stratocaster (Blue Agave, Rosewood Fretboard, Fender Tex-Mex p'ups; GFS Trem/Block Kit) Highland Spitfire (semi-hollow, flame maple top w/ bubinga inlay)Acoustics:Washburn D10CEQSB, Yamaha FG160E
Bass: Westone Spectrum ST, Warwick Rockbass Corvette Basic Active
Amps: Vox NT15H/V112NT Night Train, Peavey Bandit 112, Hartke HyDrive 210C Bass Amp, Vox DA5
Yup, 'xactly.Originally Posted by t_ross33
DVM's Ever-Expanding Gear List:
Guitars - W-A-A-A-Y-Y too many to list. Check 'em all out HERE
Amps & Cabs - "Kap'n Kerrang-aroo" BYOC 18W TMB kit amp head; Mojave Coyote head; Fender Hot Rod Deluxe Lacquered Tweed Ltd. Ed.; Allen Sweet Spot kit amp; BYOC Tweed Royal kit amp; Epiphone Valve Jr. combo + mods; Drive 2x12 cab / Celestion G12M Greenback + G12H30; AB Custom Audio 1x12 cab / Celestion Alnico Blue
Pedals/Effects - ZILLIONS, including DVM's Home-built Pedals - See some HERE and HERE, TOO!
DVM's Gear Photos
Visit MY WEBSITE!
Yep, rub a dryer fabric softener sheet like Bounce, etc on the pickguard.
Be sure you like the fragrance of the sheet before you stash it in the guitar case and snap the lid shut, though.
^^
AXES: Fender '81 The STRAT, '12 Standard Tele, '78 Musicmaster Bass, '13 CN-240SCE Thinline; Rickenbacker '82 360-12BWB; Epiphone '05 Casino, '08 John Lennon EJ-160E; Guild '70 D-40NT; Ovation '99 Celebrity CS-257; Yamaha '96 FG411CE-12; Washburn '05 M6SW Mando, '08 Oscar Schmidt OU250Bell Uke; Johnson '96 JR-200-SB Squareneck Reso; Hofner '07 Icon B-Bass; Ibanez '12 AR-325. AMPS: Tech 21 Trademark 10; Peavey ValveKing Royal 8; Fender Acoustonic 90, Passport Mini, Mini Tonemaster; Marshall MS-2 Micro Stack; Behringer BX-108 Thunderbird; Tom Scholz Rockman. PEDALS/FX: Boss ME-50; Yamaha EMP100; Stage DE-1; Samson C-Com 16 L.R. Baggs ParaAcoustic D.I; MXR EQ-10.
Sounds like it's broken. You need to send it to me and I'll fix it for you. It may take a few years but eventually you'll get it back.
Either that or a dryer sheet like the other guys said.
"No Tele For you." - The Tele Nazi
Ha! Tele-ish now inbound.
I used to get this static build up on nearly every guitar that I have that has a plastic pick guard. (Strats especially) The best way to fix that, from my own experience, is to take off the pickguard and apply aluminum foil to the back side of your pickguard. Rubber cement works really well for glueing the foil to the back of your pickguard. Then just trim off the excess foil with an exacto-knife or something. Then re-attach the pickguard, and you will never have this static problem again. Note: make sure that your foil backing comes into contact with the metal part of your pickup selector or volume/tone control pots. These sections are normally attached to the ground lug of your input jack also. This is what grounds the back of your pickguard.
--Jim
Electrics: Hamer Newport, Fender Clapton Strat, Ibanez AF86, Line6 Variax 700
Acoustic Guitars: Taylor 514CE, Martin J40-M
Dobro: Regal "Black Lightning Dobro"
Mandolin: Morgan Monroe Mandolin
Amps: Egnater Rebel 30, Vox AD120VTX, Roland Cube 60
http://www.soundclick.com/bands/page...?bandid=301718
If you do use a drier sheet, make sure to use vintage, NOS Bounce sheets. Nothing else is as musical. Just ask anybody.
Axen: Jackson DK2M, Fender Deluxe Nashville Telecaster, Reverend Warhawk 390, Taylor 914ce, ESP LTD Surveyor-414
Amphen: Jet City JCA22H and JCA12S cab, Carvin X-60 combo, Acoustic B20
Effecten: "Thesis 96" Overdrive/Boost (aka DVM OD2), Hardwire DL-8 Digital Delay/Looper, DigiTech Polara Reverb, DigiTech EX-7 Expression Factory and CF-7 Chorus Factory, Danelectro CF-1 Cool Cat Fuzz
"I wish Imagine Dragons would be stuck in an Arcade Fire for an entire Vampire Weekend."--Brian Posehn
Thanks, guys! But...what did they do back in the 50's?? I want to be Classic-Vibe- correct .
"GAS never sleeps" - Gil Janus
"Now you got to pay your dues. Get that axe and play the blues." - Spudman
Gear: Epiphone Sheraton II, Epiphone Wildkat, Epiphone Emperor Joe Pass, Fender MIM Strat, Tacoma DR-14, Johnson JR-200 resonator; Fender Super Champ XD amp
I used to think that too and then I did an A-B comparison and really didn't notice much difference between Bounce, Downy, and Snuggle. However the Gain sheets definitely were louder. The Sun & Earth sheets had a more woody/natural tone than most of the others. I really thought the Bounce sheets were fine but the NOS Bounce really wasn't worth the extra cost. Besides, they make them in the same factory anyway.Originally Posted by marnold
"No Tele For you." - The Tele Nazi
Ha! Tele-ish now inbound.
LOL!!! Marnold and Spud, you've created new dimensions of cork-sniffing - but be careful of sniffing those drier sheets too much...
"GAS never sleeps" - Gil Janus
"Now you got to pay your dues. Get that axe and play the blues." - Spudman
Gear: Epiphone Sheraton II, Epiphone Wildkat, Epiphone Emperor Joe Pass, Fender MIM Strat, Tacoma DR-14, Johnson JR-200 resonator; Fender Super Champ XD amp
We're trying to get good enough to post on TGP.Originally Posted by tjcurtin1
"No Tele For you." - The Tele Nazi
Ha! Tele-ish now inbound.
If I might interject here... If I am not mistaken, didn't Leo put a copper shield (same shape as the pickguard) between the pickguard and the body? Or were they used on later Strats?Originally Posted by tjcurtin1
At any rate, you can search eBay for one...
"...and I am outta here!"
Scott
Guitars:
Dean EVO Exotic Burl, EVO Special, Vendetta 1000 FR, Stagg Les Paul copy, Squier Standard Telecaster, Squier MIK Stratocaster
Amps:
Fender Princeton 65 (solid state), Vox AD15VT, Peavey Windsor Studio, Crate Vintage Club 50 2x12
Pedals:
DOD FX40B (x2), FX50, FX52, FX55, FX65, FX67, FX80
Washburn LSESLD, LSBOD
BBE Free Fuzz
Behringer EM300, VP1, PH9
Dunlop GCB-95
ProCo Rat II "The Rat"
DigiTech Bad Monkey, RP90
Rockman Soloist
and many, many, many more!
What I did on my CV 50's Tele was I added a ground wire to the neck pickup cavity ... it was painted with shielding paint but it wasn't connected to the control area shield ... so I took a couple of short small screws and added a wire to connect the front cavity to the control cavity.
Are you sure it's not a string or strings readjusting tension as a result of binding in the nut or saddles after bends?
Oh, yeah - it's definitely a static electric kind of pop and crackle.
"GAS never sleeps" - Gil Janus
"Now you got to pay your dues. Get that axe and play the blues." - Spudman
Gear: Epiphone Sheraton II, Epiphone Wildkat, Epiphone Emperor Joe Pass, Fender MIM Strat, Tacoma DR-14, Johnson JR-200 resonator; Fender Super Champ XD amp
tj, the only tele-type guitar I experienced this crackling with was a Korean-build G&L Tribute Series ASAT Special, and it only happened if my fingers touched the pickguard. Rubbed a finger on it, it would go 'scritcha, scritcha, scratch'. The drier sheet wipe trick would temporarily solve the problem, but my tech thought it might also have noting to do with static build up on the pg, but might be an issue with with the pots gathering static or how the pots were grounded to the input jack.
So have you noticed if the crackling happens only when you touch the pg, or is it all the time?
I've had 2 (and now have 1) American G&L ASAT, and they never had the problem. They have CTS pots, the Tribute did not. So maybe there's something to the cheapo pots/bad ground connection thing?
I never changed the pots on the Tribute, a $10 experiment; I went instead with a $500 solution and traded it up for my first American ASAT.
You got it, Wingsdad - it happens ONLY when fingers touch the pickguard - should have mentioned that! The drier sheet has worked so far, and I'm guessing that it's primarily a winter phenomenon with static build-up. But perhaps it's worth checking the ground situation - any ideas what I should look for? BTW, before I got the CV tele, I almost grabbed a lovely used A&L Tribute tele at a local store that got sold out from under me...
"GAS never sleeps" - Gil Janus
"Now you got to pay your dues. Get that axe and play the blues." - Spudman
Gear: Epiphone Sheraton II, Epiphone Wildkat, Epiphone Emperor Joe Pass, Fender MIM Strat, Tacoma DR-14, Johnson JR-200 resonator; Fender Super Champ XD amp
I was diving in here to see if you'd solved the problem, and when I read thru things, I realized you hadn't specified that...why would you? I didn't notice it at first myself, until I got more irritated by it, was putting the guitar down and touched the pg without hitting anything else. Snap-Scritch!
If it's a bad ground, my tech was saying he'd be looking at a loose connection of the ground to the jack or pots, from messed up soldering or a break somewhere in the wire, as in defective wiring or pinched, broken insulation. The guitar was brand new when I got it, so, if that was it, it would have been a warranty fix. But, if that wasn't it, the next culprit woud have been a flaw in the pots. He would've used a meter on the potential problem spots. I have no clue how to use one of those.
Tributes are a righteous economy line, because they use the same USA pickups as the American models they emulate, and G&L pickups are excellent. I think, but I'd have to check, they're even using more USA-made hardware nowadays. i/e bridges and trem systems.
^^
AXES: Fender '81 The STRAT, '12 Standard Tele, '78 Musicmaster Bass, '13 CN-240SCE Thinline; Rickenbacker '82 360-12BWB; Epiphone '05 Casino, '08 John Lennon EJ-160E; Guild '70 D-40NT; Ovation '99 Celebrity CS-257; Yamaha '96 FG411CE-12; Washburn '05 M6SW Mando, '08 Oscar Schmidt OU250Bell Uke; Johnson '96 JR-200-SB Squareneck Reso; Hofner '07 Icon B-Bass; Ibanez '12 AR-325. AMPS: Tech 21 Trademark 10; Peavey ValveKing Royal 8; Fender Acoustonic 90, Passport Mini, Mini Tonemaster; Marshall MS-2 Micro Stack; Behringer BX-108 Thunderbird; Tom Scholz Rockman. PEDALS/FX: Boss ME-50; Yamaha EMP100; Stage DE-1; Samson C-Com 16 L.R. Baggs ParaAcoustic D.I; MXR EQ-10.