What String Gauge Do You Use?

[Robert****]

I use 10's.

[Robert****]

I sometimes use 9s on a Tele though, so I can do country style bends easier...

[Eric***]

I used 11s for a couple of years, but now I have 10s on both of my electrics. I think I still have 12s on my acoustic. And I have 8s on a different electric. I'm still deciding, I guess.

But for the moment, I use 10s on the electric guitars that I actually play seriously.

[mrmudcat]

10's

[Tig***]

I've also just loaded 10's on the acoustic (Elixir Nanoweb Extra Light Phosphor Bronze). I got tired of the suspension bridge cable sized 13's and I wanted to match the feel of my electrics. So far, I love it!

Why are acoustic strings so heavy?

[FrankenFretter***]

I have 10s on most of my ten guitars, but I do tend to use 9s on the super-strat style guits. I think my acoustic has 13s or something, because that was the lightest gauge I could find at the time. I think I have something in stock that's lighter, but I haven't swapped strings yet. I find that 10s have a nice "chunk" on the wound strings, and the unwound seem a little brighter than 9s do.

[progrmr]

10's and only 10's. I tried some 11's on my agile LP but for blues they were too tough on fast bends. Back to 10's.

[Tibernius]

For Standard tuning I use 10s on electric and 12s on acoustic.

I use heavier strings most of the time though as I drop-tune a lot; I'm currently using 12-60s in C Standard although I'm swapping to 11-54s in Drop-C next time I change strings.

[mark wein]

I actually play a few different gauges lately...10's on most of my guitars but I have 11's on my green strat and 12's on my AS73 and the 1979 The Paul.

[sunvalleylaw]

I have always used 10s. I still have the original 9s on my tele, and have been enjoying the ease of play. I tend to overbend with the 9s though.

[Spudman***]

I've started using 6's and tuning down a full step. They sound really heavy and I can totally shred!

[Katastrophe]

LOL! ^^^^^

I've tried everything from .008s to .010s on my guitars... Stuck with .010s for years, but decided that for me the difference in tone was negligible, and have been playing .009s for the last 3 or 4 years.

[wingsdad]

10's (D'add EXL-110 or equivalent Light gauge sets) on electric 6's. I used to swap the .017 3rd for an .016 to facillitate wide range bends doing double-stops. For my style of play, mainly a rhythmer, anything lighter is just too weak and wimpy and tend to stretch out of tune/wear out too fast.

I've also just loaded 10's on the acoustic ... I wanted to match the feel of my electrics. ...

I use 10's (D'add EJ-15 or equivalent), typed as 'Extra Lights' for an acoustic, for the same reason on my Ovation Celeb CS257, as other than the 3rd/G, they're a close enough match to approximate the feel/touch of my electrics. Since tone/volume on it (or any A/E) can be shaped by its pre-amp and/or whatever it's plugged into, the lighter gauge is fine.

...Why are acoustic strings so heavy?

Unless it's an A/E and playing unplugged isn't your thing with it, then the heavier gauges like 12's (D'add EJ-16 or equiv.), actually typed a 'Light Gauge' for acoustics, serve the purpose of generating more robust tone & stronger volume with a lighter touch than 10's are capable of producing.

I had been using 10's on my ancient Guild D40 because it's so freakin' fragile, but I just switched back up to 12's because I recently sold both of my Takamine Santa Fe's that, although A/E's, I played them mostly unplugged and used 12's on them to give them a stronger voice. Now that the Old Lady is back to being my main squeeze acoustic, she sings way, way better with 12's than 10's. I brought her action way down to comp for the heavier gauge and do a bit more hand cal's warming up to get my grip up to speed.

[Beerman***]

I use 10's but have used 9's on the Strat as it's a bit easier to play but I've since moved the Strat to 10's as well. I like the sound much better.
On my acoustics I've used 10's and 11's but like the 10's so I can do a bit of bending when needed.

[marnold***]

I've started using 6's and tuning down a full step. They sound really heavy and I can totally shred!

That's nothing. I use 6s on my _bass_.

Actually I use GHS Boomers .010-.046 on my guitar and DR Hi Beams .045-.105 on bass, both in standard tuning.

[Spudman***]

That's nothing. I use 6s on my _bass_.

I hear ya, but I use 4's on ma base. I can sound just like Steve Harris. dinggagadinggagding

[JazzFan]

13's on my Epiphone Sheraton, 10's on my Jackson DNKY, 10's on my Takamine, and I forgot what's on my bass.

[Tig***]

Welcome to The Fret, JazzFan.
There are plenty of jazz fans here, so you should enjoy the place. (I grew up listening to and seeing the past jazz greats play live)

Drop by the Fret Players section and introduce yourself when you get a chance. We're suckers for gear, musical influences, favorite artists, etc.

[Spudman***]

I use 9-42 on my longer scale guitars and 10-46 on shorter scale guitars. For years I used 10s on everything but that was when I was playing all the time.