Never tried them but we've got a couple of bassists here who should be able to help.
Looking at pairing the Ampeg PF500 Portaflex head with a Fender Rumble 410 cab. Any thoughts? As I really don't know much about such pairings, I was hoping you knowledgable folks could help me out.
Is this something you would consider do-able? A compatible combination, tone-wise? Power-wise?
Thanks y'all!
Scruff
Never tried them but we've got a couple of bassists here who should be able to help.
Axen: Jackson DK2M, Fender Deluxe Nashville Telecaster, Reverend Warhawk 390, Taylor 914ce, ESP LTD Surveyor-414
Amphen: Jet City JCA22H and JCA12S cab, Carvin X-60 combo, Acoustic B20
Effecten: "Thesis 96" Overdrive/Boost (aka DVM OD2), Hardwire DL-8 Digital Delay/Looper, DigiTech Polara Reverb, DigiTech EX-7 Expression Factory and CF-7 Chorus Factory, Danelectro CF-1 Cool Cat Fuzz
"I wish Imagine Dragons would be stuck in an Arcade Fire for an entire Vampire Weekend."--Brian Posehn
Hi Scruff!
The Ampeg PF (Portaflex) 500 is 500 watts at 4 ohms. If the Rumble 410 is rated at 4 ohms, then you'll be getting all 500 watts out of the head and will be plenty loud for most gigs and band situations.
If the Rumble is an 8-ohm cab, then you'd still be getting around 300 watts which can be fairly loud depending on the efficiency of the cab. Either way, the setup will be compatible.
Tone-wise, I think the PF 500 should sound very nice! The Rumble 410 is pretty new and I have no clue what it may sound like. The Rumble looks to be quite decent on paper for the price.
The amp head is awesome and the cab may sound pretty killer too.
NWBasser, that's exactly the info I was looking for!!! I knew someone here would be able to steer me in the right direction. Thanks for the help!!!!
I was going to chip in but NWB's answer said everything I would've.
Visit Crash Pad at:
http://www.CrashPadBand.com
http://www.facebook.com/CrashPadBand
Gear List/Pics:
http://krashpad.fortunecity.com/brian.html
Read a review:
http://www.ink19.com/issues/july2002.../crashPad.html
I'll just add that if you can swing it, Avatar's new 3-way bass cab, the TB153, will blow nearly any commercial cab away.
It's an absolutely killer cab and not too expensive. Well worth every penny and then some.
www.avatarspeakers.com
I'll be posting pics, sound clips, and review soon.
NWB, I like the look of Avatar's 410 cabs, but they're just a bit beyond my present price range.
Country and classic rock. We play a lot of biker bars, that sort of thing, and tend to get pretty loud. Really just looking at that Fender cab right now, and was wondering if anyone here had any experience with either the combination of the Fender 410 cab and the Ampeg PF500 or a very similar rig.
For that use you should be fine with the Fender/Ampeg rig. If things get really loud and rowdy, I'd listen carefully for the speakers farting out or distorting. If that happens, EQ'ing out some bottom-end and a mid-boost may work for getting through the band mix. A bottom-heavy tone can take quite a toll on drivers.
Generally speaking, 500 to 600 watts and a 410 will work very well for 90% of bass gigs. And typically, if you need more than that you can run a DI signal to the FOH system and let it work for you.