Tube Screamer Clone Mod

[duhvoodooman***]

3 chips? This guy made clips of 11 chips!

http://www.thegearpage.net/board/sho...d.php?t=239977

Time to make the Mega Zonker with a rotary chip selector that goes up to 11!

DOOD!! None of those clips I posted demo'ed different chips, i.e. IC's or "opamps" as they're often called. The point was to show the ZYS's switchable features--two gain ranges, three clipping modes, and three different bass cuts.

BUT FEAR NOT!! For lo, the ol' Voodoo Man has that one covered, too. I made a couple of clips to demonstrate the differences (subtle though they are!) between 6 popular opamps, including 5 that the GearPage guy did plus one he didn't include. I posted it HERE at the BYOC forum back in early Feb.

Since that time, I've tried another chip I'd read good things about and currently have in my personal ZYS--the TI TLC2272. It's my favorite TS chip thusfar. More articulate than the JRC4558D but not sterile sounding, as the GearPage guy correctly describes the Burr Brown OPA2134PA. It's definitely possible to be too high fidelity is this application!

[tot_Ou_tard]

DOOD!! None of those clips I posted demo'ed different chips, i.e. IC's or "opamps" as they're often called. The point was to show the ZYS's switchable features--two gain ranges, three clipping modes, and three different bass cuts.

BUT FEAR NOT!! For lo, the ol' Voodoo Man has that one covered, too. I made a couple of clips to demonstrate the differences (subtle though they are!) between 6 popular opamps, including 5 that the GearPage guy did plus one he didn't include. I posted it HERE at the BYOC forum back in early Feb.

VOOD! It just goes to show that when I say that I know nothing, I mean it!

Cool! I knew you'd have it covered.