Quote Originally Posted by duhvoodooman View Post
For the problem with the inner/outer coils at positions 2 & 4, I would just turn the neck pickup 180 degrees. The other issue with the one coil missing at position 3 sounds like there may be an unwanted connection/short between a couple of adjacent lugs on the outboard side of the switch.
Thanks DVM. That sounds like a possible solution on the coils. I had set them so both sets of wires came off toward the pots. Hmm. Maybe it will work the other way on the neck. It is a swimming pool route. For the other stuff, I may just redo that entire side. I have to re-do the hot wire for the bridge too, as I don't like the joint. The insulation is stripped too far back, and there is no slack.