Line 6 Pod XT

[Nelskie]

Anyone here own, use, or have played through one of these? Up until now, I've been patiently waiting for someone to do a post on one of these little magic boxes, but so far - nada! I've heard some pretty awesome guitar stuff done with this piece of gear, and have even watched a couple of players use these live, either running them as a pre-amp, or directly into the board. They're loaded with all kinds of tones and features. The new Pod XT goes for around $300, and considering all that it can do, esp. in the home-recording dept., it seems like a pretty worthwhile piece of great to have.

Here's a link to the Pod XT tone sample page on the Line 6 website. Some of these tones are dangerously close to the originals, so prepare yourself:

http://www.line6.com/podxt/sounds.html

I'm seriously considering getting one of these, and would like to hear what everyone else thinks of them - esp. from the recording stand-point.

[Spudman***]

Nelski

I'm using a Behringer Vamp 2 which is reportedly, according to users who have used both, the same thing just costs less. They even have a Pro rackmount version with USB.
However, Listen to Ayreon's "The Human Equation" or "Electric Castle" albums. Both are done into a computer with a POD. Killer tones.

Either way I'm sure you'll dig having one. I run my Vamp into the effect loop of any of my guitar amps and get some dynamite sounds. Try it with 2 amps and hold on. S-T-E-R-E-O! Yowsa.

Check out the reviews of both units at Harmony Central first.

http://www.harmony-central.com/Effec...V_Amp_2-1.html
http://www.harmony-central.com/Effec..._Pro_XT-1.html

[SuperSwede]

Nelski, I have the Korg AX10g Amp Modeler. I got it from my wife this christmas. I will upload a clip and review when Robert gets the MP3 upload running again.

[Nelskie]

Thanks Swede - I look forward to hearing them.

[Nelskie]

Man, what was I thinking back in January, and me not using my POD XT for live use? Not only does this that little red bean totally rock, it is more than well-suited for use in a live environment, provided that 1.) you've read the manual; 2.) you comprehend the parts about input / output devices in relation to the unit's settings; and 3.) you've read the manual. Did I mention the part about reading the manual?

Ever since acquiring my Tech 21 amp (which I run the POD through), it has been tone-farming free-for-all. A big, fat, juicy, thick, tasty, chimey, twangy free-for-all. Folks, this stuff sounds fantastic live, and there's absolutely no reason you should limit the POD to line-in recording use only. It's meant to be cranked up, and played hard, just like any other good amp would be. I have yet to try the unit run directly through a P.A., but I do assume that situation will eventually present itself down the road. And having read the manual several times, I'm assuming that I am properly "in the know" to be able to pull it off with satisfactory effect.

It is also important that you understand that running the POD through a regular amp will slightly colour its tone. Rather than get into details, here is a link to the previous post I did on that very subject:

http://www.thefret.net/showpost.php?p=4457&postcount=1

Another thing I've also addressed with regards to the POD: like any amp-modeling gear / equipment, it does not sound exactly like the real thing. Does it sound "in the ballpark"? Most definitely! Plus, when you add all of the other things into that equation - stompbox models, cabinet models, tube pre-amp, USB connectivity, and direct-recording features, this is one feature-packed device that is loads of fun to play through. As a matter of fact, I don't ever see myself without one.

For POD-inclined Fretters, here are a few links to some good websites. The latter (3) have some nice tone patches for download:

http://www.soundonsound.com/sos/Jan0...line6podxt.asp
http://www.minimumblue.com/guitar/gu...odbystyle.html
http://www.robtognoni.com/line6.htm
http://www.instituteofnoise.com/l6/filesearch.asp

Myself, I've read one too many nasty anti-POD / anti-modeling reviews from opinionated, die-hard tube-heads. Since I know that many of our fellow forum members are Vox Valvetronix converts, I am pretty sure that there are a lot of folks like me who think its time that gear manufacturers embracing modern modeling technology got a fair shake, and a tip of the hat for their efforts in bringing the classic tones of the greatest amps, cabinets, and effects of all time to the everyday player. Really, there's no reason why anyone shouldn't be able to enjoy the fantastic groove of a '58 Fender Bassman, the stinging blues vibe of a '66 Marshall JTM-45, or the all-out assault of a Mesa Boogie Dual Rectifier without having to pony up a small fortune.

That technology is here - right now! So why not enjoy it?

[Nelskie]

Spud - Have you done any recording with the V-Amp directly into a computer? Also, do you need to have an effects loop to be able to run it directly into an amp? I've read up some on this issue, and it seems like a lot of players don't get things hooked up right, or have things like the cabinet emulation on, and are disappointed with the sounds / tones that they are getting. While its good to have some options as far as playing live is concerned, the primary reason I would buy it would be for computer-direct recording. I'm perfectly happy with the live tones I get through my amps, so a Pod or a V-Amp wouldn't be a "go-to" option in that sense.

[SuperSwede]

I could not agree more with you Nelskie... I am really satisfied with my Tonelab.

[Spudman***]

Oh no! Nelskie is one of the Pod People!! Run people, run! Pretty soon we'll all become Pod People.



I dibs the movie rights.

[Nelskie]

Oh no! Nelskie is one of the Pod People!! Run people, run! Pretty soon we'll all become Pod People.

I dibs the movie rights.

Nice. As long as Angelina stars as my love interest, and ZZ Top is doing the soundtrack, the big-screen adaptation should be gas!

But really, the POD XT is a way cool piece of gear. If I could take it back with me to 1983, in Mr. Peabody's Way-Back machine, there's no telling what could have happened.

[Spudman***]

But really, the POD XT is a way cool piece of gear. If I could take it back with me to 1983, in Mr. Peabody's Way-Back machine, there's no telling what could have happened.

Can you imagine if Buddy Holly would have had one? Oh my gosh! Peggy Sue would have gotten run over by a British stack.

[Nelskie]

Even though I know there aren't a whole lot of PODxt users on our forum, I still thought I'd share a new patch link that I recently found on the Line 6 user's forum. Some of the POD gurus over there have posted their tone bundles, and let me tell you, these guys can work magic with the little red bean. I think a few of these were posted on another POD-related thread here on FN, but for the life of me I can't find it. Anyways - besides those that were already posted, there's a bunch of new ones. Here's the link:

http://line6.com/cgi-bin/ultimatebb....=3&t=016178&p=

Remember, in order to load these patches / bundles into your PODxt, you'll need the Line 6 Editor (*provided with the PODxt package.), along with current drivers, etc. (*readily availble by using your Line 6 Monkey utility.) Angel1973's bundle of classic Fender amps is awesome, and highly recommended if you want to groove out to some classic Stones (which I've been known to do on occasion. )

Also of note: some of the tones in these bundles may require one / several of the Line 6 add-on packs. As one might surmise, if you don't have them, the patch won't work. A good majority of them, however, do work with the models that originally came with your PODxt, and with those that came with the 3.0 version upgrade.

[stingx]

Been a PodXT owner since '03. Line 6 is a top-shelf company. They still release updates for it regularly. I am at the latest firmware, have all the model packs and have made and submitted over 145 patches over the years. I use it to "re-amp" in Cubase when recording as well. As much as I love it and have made extensive recordings with it - just look at http://stubble.org/music where 98% of what you hear there was recorded with the XT - I never liked it outside of a recording device. I have really tried to but it just doesn't do it for me. For me there's nothing like just plugging a Strat into a tube amp. Gets me every time.

Anyway, I will post back in this thread later tonight after work and direct you to the motherload of all PodXT patches. Enough patches to consume all your time where you'll end up getting divorced, losing your job, being alienated by friends, etc. for lack of attention to anything else.

Oh, and comparing it to a V-Amp is like comparing a Ferrari to a Chevy. Sorry Spud.

[Spudman***]

Oh, and comparing it to a V-Amp is like comparing a Ferrari to a Chevy. Sorry Spud.

HEY! The appologies go on a different thread.

I totally agree....but Chevy does make the Corvette.

[Tim]

Not to worry Spud's! As you know I own one of those blue guitar body modeler. I will be sending you a PM on some questions on it's use.

[Robert****]

I should really get a POD. I have trouble recording at home because there's always people and kids around and I want to crank my amp a bit when recording.

The POD sounds really good, and must a perfect thing for recording ideas.

Ahh well, another thing to buy... it never stops does it?

Thanks for the tip, N - if I ever get a POD I'll try some of those patches.

[NPauly]

I should really get a POD. I have trouble recording at home because there's always people and kids around and I want to crank my amp a bit when recording.

The POD sounds really good, and must a perfect thing for recording ideas.

Being such a big Vox guy I would have thought that the new Tonelab LE was already on its way to your house.

Ok now for my real question ...

How does the Line 6 POD XT Live stack-up to the new Vox Tonelab LE? Pros, cons? I'm considering purchasing one or the other in the coming months and I'm looking for opinions ...

[Nelskie]

How does the Line 6 POD XT Live stack-up to the new Vox Tonelab LE? Pros, cons? I'm considering purchasing one or the other in the coming months and I'm looking for opinions ...

Our friend Warren posted this very informative modeler head-to-head from the Stompbox.net a few months ago. I found a lot of good information in this in-depth review here:

http://www.thestompbox.net/ViewArtic...x?ArticleID=21

Zoom's new G-series processors are starting to trip a few wires around the 'net - esp. their G7.1ut and G9.2tt models, which feature a "tube energizer circuit" similar to the Vox Tonelab. They might be worth checking out, too. Here's a link to the Zoom web page.

http://www.zoom.co.jp/english/products/g92tt/

As for the PODxt and XTL, they're both solid as far as tones go. I have the PODxt, and like it a lot. It's great for both line-in work, as well as for playing live (provided that you spend some time learning how to properly set it up to do so.) Bear in mind that with any piece of modeling gear, there's going to be a learning curve. With the POD stuff, maybe even more so. There are a ton of internet sites, to include the Line 6 forum, for you to reference when starting out, and they all have a lot of good information in regards to sound patches, settings, tips, live use, and recording.

The Super Swede and tot au tard both use the Vox Tonelab. From what I've read here on FN, they both seem to like theirs a lot. Maybe they can chime in and offer their thoughts.

[warren0728]

Our friend Warren posted this very informative modeler head-to-head from the Stompbox.net a few months ago.

i don't think that was me...but a few months is a long time to remember something!!

ww

[tot_Ou_tard]

The Super Swede and tot au tard both use the Vox Tonelab. From what I've read here on FN, they both seem to like theirs a lot. Maybe they can chime in and offer their thoughts.

Hey Nelsk! That's tot Ou tard, you make me sound like some kinda entree
BTW, entree = appetizer not main course.

Yes, I love my Tonelab, but I've never tried a Pod XTL. I did try a Zoom G2 & exchanged it (along with some cash) for the Tonelab. I liked the tones better & I'll take knobs over deeply layered menus any day!

That said, I resolutely refuse to give recommendations to all but absolute beginners, because I really don't know what I am talking about!