-
April 27th, 2007, 10:03 AM
#1
Bad Monkey OUT2 to Mixer
I connected it to line-in of my PC through the OUT2 (to Mixer). I could hear the guitar sound but only at right channel while nothing at left channel. I asked Digitech and replied that this is normal because Bad Monkey does not output stereo sound. I wonder what's the difference between mixer and PC because I have no experience on using mixer. Pls advise. thanks!
-
April 27th, 2007, 10:43 AM
#2
You need a 1/4" Mono to 1/8" Stereo adapter.
Guitars (All Lefty): Fender MIM Wine Red Telecaster
Washburn D10SCELHBK
Greg Bennett (Samick) Avion AV3/LH/CS
Franken-Strat (Maple Neck / Black Body & Pickguard / 2-Point Tremolo / GFS Alnico Single-coil Pups / Gold Hardware)
2 Fullerton Standard Strats; Sunburst w/ GFS Overwound P'ups and Black w/ GFS Lil Killer Rail 'Buckers
Fullerton Deluxe Dreadnought
Amp: Blackheart BH1HS Killer Ant Half Stack (Bitmo Ant Eater Kit)
Crate V18-112 (Goodsell RGM Speaker / Accutronics Tank / Switch R4 - R10 Mod)
Pignose G40V (Jensen MOD Speaker / DC Heater Mod / Pentode:Triode Switch)
Fender Champion 30 Reverb (Accutronics Tank / Jensen MOD Speaker)
Speaker Cab: Lopo 1x12 Tweed Convertible w/ Eminence GB128 Speaker
Pedals: Korg ToneWorks AX1000G, AX5G, & AmpworksG Modeling Signal Processors
Boss DS-1 (Rectifier Tri-Gain Plus Mod); CS-3 (Opto Plus Mod); SD-1 Super (GT Mod); GE-7 (Plus Mod)
Fender PT-100 Tuner
E.H. Big Muff Pi (US)
S.D. Pickup Booster
Ibanez CF7 Chorus/Flanger
Alesis NanoVerb
ART Tube MP Studio (OPA2604 Op Amps) (On Champion 30)
Behringer NR100 & OD100
-
April 27th, 2007, 11:28 AM
#3
in fact if I connected the Bad Monkey OUT1 to amp and then connect the amp to line-in of soundcard, I could get 2 channel. So I'd like to know the reason behind. Thanks.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules