It's more indicative of a cheap soundcard.Originally Posted by hkrle
I have a cheap Laney LX12. I always connect it to line-in of my PC for guitar recording. If I increase the recording volume, the background noise is very serious. Pls advise if it is natural or it is the problem of my cheap amp.
THanks.
It's more indicative of a cheap soundcard.Originally Posted by hkrle
How do you plug the amp into your soundcard? The LX12 doesn't have a line output.
Guitars (All Lefty): Fender MIM Wine Red Telecaster
Washburn D10SCELHBK
Greg Bennett (Samick) Avion AV3/LH/CS
Franken-Strat (Maple Neck / Black Body & Pickguard / 2-Point Tremolo / GFS Alnico Single-coil Pups / Gold Hardware)
2 Fullerton Standard Strats; Sunburst w/ GFS Overwound P'ups and Black w/ GFS Lil Killer Rail 'Buckers
Fullerton Deluxe Dreadnought
Amp: Blackheart BH1HS Killer Ant Half Stack (Bitmo Ant Eater Kit)
Crate V18-112 (Goodsell RGM Speaker / Accutronics Tank / Switch R4 - R10 Mod)
Pignose G40V (Jensen MOD Speaker / DC Heater Mod / Pentode:Triode Switch)
Fender Champion 30 Reverb (Accutronics Tank / Jensen MOD Speaker)
Speaker Cab: Lopo 1x12 Tweed Convertible w/ Eminence GB128 Speaker
Pedals: Korg ToneWorks AX1000G, AX5G, & AmpworksG Modeling Signal Processors
Boss DS-1 (Rectifier Tri-Gain Plus Mod); CS-3 (Opto Plus Mod); SD-1 Super (GT Mod); GE-7 (Plus Mod)
Fender PT-100 Tuner
E.H. Big Muff Pi (US)
S.D. Pickup Booster
Ibanez CF7 Chorus/Flanger
Alesis NanoVerb
ART Tube MP Studio (OPA2604 Op Amps) (On Champion 30)
Behringer NR100 & OD100
The 'phone ' of the amp to the 'line-in' of soundcard with normal audio cable. It works fine except the background noise.Originally Posted by WackyT
do u think cheap soundcard creates the background noise? pls share your experience? thanks!Originally Posted by stingx
How are you controlling the recording level on the computer? Turning up the volume on the amp, or controlling the input level on the computer? And what software are you using on the computer to record with?
Guitars (All Lefty): Fender MIM Wine Red Telecaster
Washburn D10SCELHBK
Greg Bennett (Samick) Avion AV3/LH/CS
Franken-Strat (Maple Neck / Black Body & Pickguard / 2-Point Tremolo / GFS Alnico Single-coil Pups / Gold Hardware)
2 Fullerton Standard Strats; Sunburst w/ GFS Overwound P'ups and Black w/ GFS Lil Killer Rail 'Buckers
Fullerton Deluxe Dreadnought
Amp: Blackheart BH1HS Killer Ant Half Stack (Bitmo Ant Eater Kit)
Crate V18-112 (Goodsell RGM Speaker / Accutronics Tank / Switch R4 - R10 Mod)
Pignose G40V (Jensen MOD Speaker / DC Heater Mod / Pentode:Triode Switch)
Fender Champion 30 Reverb (Accutronics Tank / Jensen MOD Speaker)
Speaker Cab: Lopo 1x12 Tweed Convertible w/ Eminence GB128 Speaker
Pedals: Korg ToneWorks AX1000G, AX5G, & AmpworksG Modeling Signal Processors
Boss DS-1 (Rectifier Tri-Gain Plus Mod); CS-3 (Opto Plus Mod); SD-1 Super (GT Mod); GE-7 (Plus Mod)
Fender PT-100 Tuner
E.H. Big Muff Pi (US)
S.D. Pickup Booster
Ibanez CF7 Chorus/Flanger
Alesis NanoVerb
ART Tube MP Studio (OPA2604 Op Amps) (On Champion 30)
Behringer NR100 & OD100
u can control the output volume and record volume as usual. If you don't know, try to read the manual of your PC. It's common settings. I mainly use Adobe audition to record the guitar and keyboard. It's a very nice software providing multi-tracking for recording.Originally Posted by WackyT
I've been working on PCs for over 15 years, hkrle. And I'm trying to help YOU out with YOUR problem. So please don't tell me to "read the manual of your PC". What I'm thinking is you're overdriving the input on your soundcard. If your recording level goes over 100%, you're going to get clipping noise.
Guitars (All Lefty): Fender MIM Wine Red Telecaster
Washburn D10SCELHBK
Greg Bennett (Samick) Avion AV3/LH/CS
Franken-Strat (Maple Neck / Black Body & Pickguard / 2-Point Tremolo / GFS Alnico Single-coil Pups / Gold Hardware)
2 Fullerton Standard Strats; Sunburst w/ GFS Overwound P'ups and Black w/ GFS Lil Killer Rail 'Buckers
Fullerton Deluxe Dreadnought
Amp: Blackheart BH1HS Killer Ant Half Stack (Bitmo Ant Eater Kit)
Crate V18-112 (Goodsell RGM Speaker / Accutronics Tank / Switch R4 - R10 Mod)
Pignose G40V (Jensen MOD Speaker / DC Heater Mod / Pentode:Triode Switch)
Fender Champion 30 Reverb (Accutronics Tank / Jensen MOD Speaker)
Speaker Cab: Lopo 1x12 Tweed Convertible w/ Eminence GB128 Speaker
Pedals: Korg ToneWorks AX1000G, AX5G, & AmpworksG Modeling Signal Processors
Boss DS-1 (Rectifier Tri-Gain Plus Mod); CS-3 (Opto Plus Mod); SD-1 Super (GT Mod); GE-7 (Plus Mod)
Fender PT-100 Tuner
E.H. Big Muff Pi (US)
S.D. Pickup Booster
Ibanez CF7 Chorus/Flanger
Alesis NanoVerb
ART Tube MP Studio (OPA2604 Op Amps) (On Champion 30)
Behringer NR100 & OD100
sorry, I misunderstood your last post. Anyway I always set the recording level to 45% or 25% but still hear the background noise. (of course if I raise the volume, the noise would increase.) When I do the same way to my keyboard, no such noise. When I do it to my guitar amp, it gets the annoying noise. The noise sounds like some frequency noise. I guess it's probably the problem to the amp. Do u think more expensive amp doesn't have this kind of noise? Do u have same case when connected to the amp? thanks!Originally Posted by WackyT
Does it sound like 60Hz or 50Hz noise? Is the amp plugged into the same circuit as your computer? It also might just be a noisy amp design.
Guitars (All Lefty): Fender MIM Wine Red Telecaster
Washburn D10SCELHBK
Greg Bennett (Samick) Avion AV3/LH/CS
Franken-Strat (Maple Neck / Black Body & Pickguard / 2-Point Tremolo / GFS Alnico Single-coil Pups / Gold Hardware)
2 Fullerton Standard Strats; Sunburst w/ GFS Overwound P'ups and Black w/ GFS Lil Killer Rail 'Buckers
Fullerton Deluxe Dreadnought
Amp: Blackheart BH1HS Killer Ant Half Stack (Bitmo Ant Eater Kit)
Crate V18-112 (Goodsell RGM Speaker / Accutronics Tank / Switch R4 - R10 Mod)
Pignose G40V (Jensen MOD Speaker / DC Heater Mod / Pentode:Triode Switch)
Fender Champion 30 Reverb (Accutronics Tank / Jensen MOD Speaker)
Speaker Cab: Lopo 1x12 Tweed Convertible w/ Eminence GB128 Speaker
Pedals: Korg ToneWorks AX1000G, AX5G, & AmpworksG Modeling Signal Processors
Boss DS-1 (Rectifier Tri-Gain Plus Mod); CS-3 (Opto Plus Mod); SD-1 Super (GT Mod); GE-7 (Plus Mod)
Fender PT-100 Tuner
E.H. Big Muff Pi (US)
S.D. Pickup Booster
Ibanez CF7 Chorus/Flanger
Alesis NanoVerb
ART Tube MP Studio (OPA2604 Op Amps) (On Champion 30)
Behringer NR100 & OD100
Do you have your amp connected to a grounded electric socket? If not, that may be the cause of your problems. The cable might also be the problem, you could try with a better cable preferably with gold plated connectors.
I can't say that I've given up on a flanger cause I've never liked the effect either. I also can't say the same about Tremolo. I hate them both equally. - Tone2TheBone 2009
I got some information today from Internet and I tried it. It really helps to minimize the noise. The approach is to connect the guitar to a preamp(I only have pedals) and then connect to the line-in of PC. The result is nice but it only have 1 channel. So I mixed the channel into 2 with PC software.
The reason of the noise is the difference of impedence between amp and line-in of soundcard. This results in the adnormal noise in soundcard.
Any comment. Thanks.