Quote Originally Posted by M29
I like the idea for added cooling on the tubes but it may end up canceling some frequencies of the speaker out. You don't want the speakers sound waves to go around the baffle board and cancel out any frequencies and this might happen if I leave an open cooling area between the amp and the speaker.

Tomorrow I can turn it up

M29
It's looking great, M29! I do have one added suggestion, per the cooling, FWIW....
The VJr.'s stock values on R10 and R14 can be changed to help reduce the B+ voltage and reduce dissipation to the EL84. This will help reduce heat and should add some longevity to the little PC board.
R10-change to a 1K 3 Watt resistor
R14-change to a 240 or 270 1 Watt resistor

Here's a pic that might help w/ the OT swap also.If you zoom it in you'll see a couple of "handy hints" I added when I did mine. It will save you time.

http://www.box.net/shared/yxze4s56pa