Here's a picture of the Fender pickup tubing.
I'd say about 1/2 to 3/4 inch length.
Im trying to get pickup screws and springs for my Strat pickguard project locally with no avail. I really didnt want to order a few dollars worth of screws and springs and then pay more for the shipping than the order was worth.
I looked into what sized screws was needed so I could just buy the screws from Home Depot leaving me with having to find the springs.
I was reading up on the subject about the springs and found that you could also use silicone tubing and that it would help with feedback as well.
Has anyone tried this?
How long should I cut the pieces of tubing?
Any help would be appreciated
Rob
Ron Paul is like Kryptonite to Tyranny
Guitars:
MIM Fender Stratocaster, Ibanez AS73, Fender F210, Martin Backpaker Steel-String
Amps:
Behringer V-Tone 2x10 60W, Marshall G10 MkII, Danelectro E-Studio Honeytone.
Pedals:
Danelectro Corned Beef reverb, Johnson flanger, DOD FX25 envelope filter, Behringer Hellbabe wah, Digitech Bad Monkey
Here's a picture of the Fender pickup tubing.
I'd say about 1/2 to 3/4 inch length.
Guitars (All Lefty): Fender MIM Wine Red Telecaster
Washburn D10SCELHBK
Greg Bennett (Samick) Avion AV3/LH/CS
Franken-Strat (Maple Neck / Black Body & Pickguard / 2-Point Tremolo / GFS Alnico Single-coil Pups / Gold Hardware)
2 Fullerton Standard Strats; Sunburst w/ GFS Overwound P'ups and Black w/ GFS Lil Killer Rail 'Buckers
Fullerton Deluxe Dreadnought
Amp: Blackheart BH1HS Killer Ant Half Stack (Bitmo Ant Eater Kit)
Crate V18-112 (Goodsell RGM Speaker / Accutronics Tank / Switch R4 - R10 Mod)
Pignose G40V (Jensen MOD Speaker / DC Heater Mod / Pentode:Triode Switch)
Fender Champion 30 Reverb (Accutronics Tank / Jensen MOD Speaker)
Speaker Cab: Lopo 1x12 Tweed Convertible w/ Eminence GB128 Speaker
Pedals: Korg ToneWorks AX1000G, AX5G, & AmpworksG Modeling Signal Processors
Boss DS-1 (Rectifier Tri-Gain Plus Mod); CS-3 (Opto Plus Mod); SD-1 Super (GT Mod); GE-7 (Plus Mod)
Fender PT-100 Tuner
E.H. Big Muff Pi (US)
S.D. Pickup Booster
Ibanez CF7 Chorus/Flanger
Alesis NanoVerb
ART Tube MP Studio (OPA2604 Op Amps) (On Champion 30)
Behringer NR100 & OD100
I've got some I can send you for free if ya want 'em.
"It's funny the way most people love the dead. Once you are dead, you are made for life." - Jimi Hendrix
Cool! Thanks. I was going to use silicone fish tank air tubing, but I definetly prefer to use the pre cutsOriginally Posted by tremoloman
Ill PM you my address
Ron Paul is like Kryptonite to Tyranny
Guitars:
MIM Fender Stratocaster, Ibanez AS73, Fender F210, Martin Backpaker Steel-String
Amps:
Behringer V-Tone 2x10 60W, Marshall G10 MkII, Danelectro E-Studio Honeytone.
Pedals:
Danelectro Corned Beef reverb, Johnson flanger, DOD FX25 envelope filter, Behringer Hellbabe wah, Digitech Bad Monkey