strat trem
On my squire strat the trem arm (bought off ebay) seems to wobble around there unless i have it so tight it only sways in place can i have it loose so it goes to the bottom of the guitar or will it break?
Regular Fretter
You can tighten the arm till it "grabs" but not further than that or you'll strip and break the arm tip inside. Take some teflon plumbers tape and wrap it around the threaded end of the trem arm and screw it in until it is snug. You should have no problems after that.
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz
thats not what i mean i mean would it be safe to have the arm loose cuz if its tight it will mess with my playing but if i had the arm loose enough so it kinda sways around would that strip the screwsOriginally Posted by tone2thebone
Regular Fretter
Most trem arms are loose that's normal. That's just the nature of the beast. With normal use and hand pressure you should be fine when you reach to use it. What I'm saying is not to tighten or screw it in past the snug point. It will strip and break inside at the threads.
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz
Regular Fretter
or get an after market bridge with a pop in arm no threads to break snap strip
Posting Permissions
Reply With Quote