Will this pickup swap right into my SX SST62 in place of the bridge pickup. I have a stop tail and want to get more gain because you can't raise up the bridge pickup enought to get a loud signal.

I'm figuring this will be a great pickup. Expecting it to come tomorrow and I will install it right away.

I'm wondering, because it is for wires, if I can just wire it for humbucker only and have it work with the middle and itself on the number 4 or 2 switch setting, whatever one that makes the bridge and middle work together.

Will this impedance difference be a problem. The vintage style bridge pickup is probably only about 6K. Will this blow out any of the other electronics in the guitar or will it be able to handle this extra impedance?

Thanks in advance,

Duff