That little sucker sounds great, Voodoo. You may have just built the least expensive boutique mini stack in existence!
Strange... I posted a reply, and now my post is missing.
Guitars:
Fender 2006 MIM Fender Stratocaster HSS in 3TS
Ibanez RG 570 with a bridge Invader
ESP M II Deluxe with a Tune-o-Matic bridge
Eleanor, the magical, mystical Road Worn wonder Tele
Blackstar HT Club 40
That little sucker sounds great, Voodoo. You may have just built the least expensive boutique mini stack in existence!
Guitars
Wilburn Versatare, '52 FrankenTele(Fender licensed parts), Fender USA Roadhouse Strat, Fender USA Standard B-bender Telecaster, Agile AL 3000 w/ WCR pickups, Ibanez MIJ V300 Acoustic, Squier Precision Bass,
Amps
Ceriatone Overtone Special, Musicman 212 Sixty-Five, Fender Blues Jr., Peavey Classic 30, Fender Super Reverb, Traynor YCV-40 WR Anniversary w/ matching 1x12 ext. cab, Epiphone SoCal 50w head w/ matching 4x12 cab (Lady Luck speakers), Avatar 2x12 semi-open back cab w/ Celestion speakers
Pedals
Digitech Bad Monkey, Digitech Jamman, DVM's ZYS, Goodrich volume pedal
That is awesome, vood! What a fun project that must be for you! :
Cool happening tones, dude! I didn't know Jimmy Page came over to play it for you?
The Law of Gravity is nonsense. No such law exists. If I think I float, and you think I float, then it happens.
Master Guitar Academy - I also teach via SKYPE.
What did you say??Originally Posted by Katastrophe
DVM's Ever-Expanding Gear List:
Guitars - W-A-A-A-Y-Y too many to list. Check 'em all out HERE
Amps & Cabs - "Kap'n Kerrang-aroo" BYOC 18W TMB kit amp head; Mojave Coyote head; Fender Hot Rod Deluxe Lacquered Tweed Ltd. Ed.; Allen Sweet Spot kit amp; BYOC Tweed Royal kit amp; Epiphone Valve Jr. combo + mods; Drive 2x12 cab / Celestion G12M Greenback + G12H30; AB Custom Audio 1x12 cab / Celestion Alnico Blue
Pedals/Effects - ZILLIONS, including DVM's Home-built Pedals - See some HERE and HERE, TOO!
DVM's Gear Photos
Visit MY WEBSITE!
Repost:
You're right... Page plays sloppier.: The tone you're getting from the amph sounds very warm, even through my little computer speakers. Great stuff, DVM!Originally Posted by duhvoodooman
Added:
I wish I had your talent with electronics. Put a soldering iron in my hand, and somebody better have a paramedic on standby, with a bed waiting at the nearest burn center.
Guitars:
Fender 2006 MIM Fender Stratocaster HSS in 3TS
Ibanez RG 570 with a bridge Invader
ESP M II Deluxe with a Tune-o-Matic bridge
Eleanor, the magical, mystical Road Worn wonder Tele
Blackstar HT Club 40
Hell yeah buddy that's what I told him. This is my next amp! Great job Voo! It's inspirational stuff mang!Originally Posted by stingx
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz
Anybody interested in tackling this DIY amp project, refer to the resource links back in posts #1 and #10 in this thread. John Calhoun's PCB and detailed instructions (with full BOM/source/part # info) really make it quite straightforward! If you have basic electrical knowledge, decent soldering skills and can follow directions, this really isn't that hard to do.... :
DVM's Ever-Expanding Gear List:
Guitars - W-A-A-A-Y-Y too many to list. Check 'em all out HERE
Amps & Cabs - "Kap'n Kerrang-aroo" BYOC 18W TMB kit amp head; Mojave Coyote head; Fender Hot Rod Deluxe Lacquered Tweed Ltd. Ed.; Allen Sweet Spot kit amp; BYOC Tweed Royal kit amp; Epiphone Valve Jr. combo + mods; Drive 2x12 cab / Celestion G12M Greenback + G12H30; AB Custom Audio 1x12 cab / Celestion Alnico Blue
Pedals/Effects - ZILLIONS, including DVM's Home-built Pedals - See some HERE and HERE, TOO!
DVM's Gear Photos
Visit MY WEBSITE!
man....i was so close... :Originally Posted by duhvoodooman
ww
Guitars: Gibson 1998 Les Paul Special : Peavey Predator (Early 90's Fat Strat Copy) : Ibanez GAX30TROriginally Posted by just strum
Brownsville Reso - 101 Electric Reso : Fender GDO-300 Maple Quilt Top Acoustic
Amps: Fender Super Champ XD
Effects: Digitech RP250 Modeling Guitar Processor : DVM "Phased and Confused" Script Phaser Clone : Digitech Bad Monkey
Danelectro Cool Cat Chorus : Behringer Distortion Modeler : Ernie Ball Volume Pedal : Dunlop Cry Baby Wah
Me too, I get lost all the time when driving.
The Law of Gravity is nonsense. No such law exists. If I think I float, and you think I float, then it happens.
Master Guitar Academy - I also teach via SKYPE.
Jeez...I gotta look at previous posts & *then* what?!?Originally Posted by duhvoodooman
Hoo boy! I've got enough trouble trying to replace a speaker .
I pick a moon dog.
Me too! I really need (ok want) a GPS.Originally Posted by Robert
I can't say that I've given up on a flanger cause I've never liked the effect either. I also can't say the same about Tremolo. I hate them both equally. - Tone2TheBone 2009
DVM, I've been giving some serious thought to trying my hand at this little project. I've downloaded the guide and reviewed it. My biggest concern as far as tackling the project is with cutting out the chassis. I think I can get the round holes ok, but I have concerns about the hole for the IEC outlet. Could you explain how you tackled that one?
Also, did you make the chassis yourself or use something commercially available? Thanks for the input.
Guitars and other stringed instruments: Washburn D10S, Washburn EA52SWCE, Washburn Cumberland J28SDL, Washburn D46S12, D'Aquisto Centura, Rover RM-50B Mando
Amps and Cabs: Behringer AT108, Firefly Tube Amph, Blackheart Little Giant BH5H, Shiner's Custom Cab v.1.0
". . . because without beer, things do not seem to go as well . . ." Brother Epp, Capuchin Monastery, Munjor, Kansas 1902
I used a Hammond 1444-16 aluminum chassis that I ordered from Mouser.com. John Calhoun includes a template for this chassis (10"x6"x2") in his instructions.
Re: the holes, I handled eveything on the chassis with a regular drill set, except for the tube holes (got some panel punches from our shop here at work for those; worked great) and the IEC connector, which one of our shop techs cut out for me with a jigsaw.
DVM's Ever-Expanding Gear List:
Guitars - W-A-A-A-Y-Y too many to list. Check 'em all out HERE
Amps & Cabs - "Kap'n Kerrang-aroo" BYOC 18W TMB kit amp head; Mojave Coyote head; Fender Hot Rod Deluxe Lacquered Tweed Ltd. Ed.; Allen Sweet Spot kit amp; BYOC Tweed Royal kit amp; Epiphone Valve Jr. combo + mods; Drive 2x12 cab / Celestion G12M Greenback + G12H30; AB Custom Audio 1x12 cab / Celestion Alnico Blue
Pedals/Effects - ZILLIONS, including DVM's Home-built Pedals - See some HERE and HERE, TOO!
DVM's Gear Photos
Visit MY WEBSITE!
Hey Voo how are you going to handle putting the chassis in a brain head ermm I mean amp head? Some plywood and finish? Some plywood covered in tolex? I can't wait to see that baby when it's finished.
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz
I have a set of Irwin Unibit stepped drill bits. Home Depot and Lowe's sell a set that includes a #1, two #3s and a #4. The #1 goes up to 1/2", the #3s go up to 3/4" and the #4 goes up to 7/8". This will cover most of your drilling needs. I like the Unibit brand as they drill nice round holes. Some of the cheaper knock-offs don't do such a good job. The Vermont American bit I have, for example, drills triangular holes when using a hand drill.Originally Posted by duhvoodooman
I was thinking of having a machinist make me a template out of 1/2" aluminum plate for cutting IEC connector holes. The Greenlee punch is about $250 Yikes! I've had good luck with using a template with a laminate trimmer and a flush cutting bit with a roller bearing. Cuts through aluminum like butter. The downside: you have to clamp the open end of the chassis down as the bit throws little aluminum chips all over the place. Also, you can't cut ferrous materials with the bit/template.
I've used this method to cut 1 & 3/8" holes in aluminum chassis. I bored a 1 & 3/8" hole in a 1/2" thick piece of MDF and use that as a guide with my laminate trimmer and flush cutting bit. I'm too cheap to pony up the cash for yet another Greenlee punch (I already own 5).
tung
Thanks DVM and Tung. That gives me a plan of attack.
Guitars and other stringed instruments: Washburn D10S, Washburn EA52SWCE, Washburn Cumberland J28SDL, Washburn D46S12, D'Aquisto Centura, Rover RM-50B Mando
Amps and Cabs: Behringer AT108, Firefly Tube Amph, Blackheart Little Giant BH5H, Shiner's Custom Cab v.1.0
". . . because without beer, things do not seem to go as well . . ." Brother Epp, Capuchin Monastery, Munjor, Kansas 1902
Really haven't decided yet. Either plywood with a tolex/vinyal finish, or maybe just a nice wood enclosure, stained & urethaned. I'm really in no hurry, because (1) I'm enjoying playing the little sucker too much, and (2) I don't lug my stuff around, so there's really no functional need for an enclosure at this point. I'll get around to it eventually, and you know I'll post it here, when I do....Originally Posted by Tone2TheBone
DVM's Ever-Expanding Gear List:
Guitars - W-A-A-A-Y-Y too many to list. Check 'em all out HERE
Amps & Cabs - "Kap'n Kerrang-aroo" BYOC 18W TMB kit amp head; Mojave Coyote head; Fender Hot Rod Deluxe Lacquered Tweed Ltd. Ed.; Allen Sweet Spot kit amp; BYOC Tweed Royal kit amp; Epiphone Valve Jr. combo + mods; Drive 2x12 cab / Celestion G12M Greenback + G12H30; AB Custom Audio 1x12 cab / Celestion Alnico Blue
Pedals/Effects - ZILLIONS, including DVM's Home-built Pedals - See some HERE and HERE, TOO!
DVM's Gear Photos
Visit MY WEBSITE!
Cool, very cool.
I'm ordering parts tonight!
On second thought..........
I made a spreadsheet for the parts and realized it's going to be $170 just for the electronics. Add a chassis, case, speaker & misc. and we're talking $250-$300 for a 1.5 watt amp - unassembled. Too much for me.
If anyone wants the spreadsheet email me (I can't attach an .xlr file here, can I?). Copying and pasting makes ordering parts easier.