Quote Originally Posted by Andy
Great job with the decal , you made it It blend in beautifully !!
Did you find it easy enough to work with?

:
Not too bad, 'course I screwed up the first one. So, this is the second attempt. I let the first one curl up by pulling off instead of sliding it directly off the backing onto the head. It was fairly easy though.

I put a couple of coats of clear on the head first, using a 0000 grade steel wool to smooth it out between coats and before I applied the decal. I then put 3 light coats of clear on top of the decal, again lightly smoothing it with the steel wool after each clear coat. This also helped to blend in the decal area with the original finish. Overall, I'm pleased! Good work Andy! :