I would think a nut driver would do the job nicely.
I thought I recalled someone posting a tool they used for tightening the nut on the jack/strap button located on the inside of the guitar.
I don't remember if it was here, or at Washburn, or even some other site, but I recall someone posting a picture of what they used because they couldn't get their arm far enough into the sound hole to tighten the nut with a conventional open end wrench.
Anyone remember the post or have a way of tightening the nut? Excluding the suggestion of getting someone with thin/little arms.
Mark
* Loud is good, good is better!
I would think a nut driver would do the job nicely.
Guitars:
Fender 2006 MIM Fender Stratocaster HSS in 3TS
Ibanez RG 570 with a bridge Invader
ESP M II Deluxe with a Tune-o-Matic bridge
Eleanor, the magical, mystical Road Worn wonder Tele
Blackstar HT Club 40
Nope, it has to be open end. The end inside the guitar has wired connected to it and the one I had experience with I believe had the wires coming out of the end. So, you can't use a box wrench, socket, or nut driver.Originally Posted by Katastrophe
Mark
* Loud is good, good is better!
Okay, I've seen some open end wrenches where the end was angled at 90 degrees to the handle of the wrench. Would something like that work?
Guitars:
Fender 2006 MIM Fender Stratocaster HSS in 3TS
Ibanez RG 570 with a bridge Invader
ESP M II Deluxe with a Tune-o-Matic bridge
Eleanor, the magical, mystical Road Worn wonder Tele
Blackstar HT Club 40
That should work if it had a decent length handle.Originally Posted by Katastrophe
Mark
* Loud is good, good is better!
Stew-Mac to the rescue...
http://www.stewmac.com/shop/Tools/Wr...ck_Wrench.html
It's a nut driver, but with a slot cut in specifically designed for what you were talking about, I think.
Guitars:
Fender 2006 MIM Fender Stratocaster HSS in 3TS
Ibanez RG 570 with a bridge Invader
ESP M II Deluxe with a Tune-o-Matic bridge
Eleanor, the magical, mystical Road Worn wonder Tele
Blackstar HT Club 40
Cool-O!Originally Posted by Katastrophe
Ya gotta love Stewart-MacDonald.
I pick a moon dog.
Strum, is that the tool you were looking for?
Curiosity kills the Kat, you know...
Guitars:
Fender 2006 MIM Fender Stratocaster HSS in 3TS
Ibanez RG 570 with a bridge Invader
ESP M II Deluxe with a Tune-o-Matic bridge
Eleanor, the magical, mystical Road Worn wonder Tele
Blackstar HT Club 40
I think that may be it.Originally Posted by Katastrophe
Hey Shiner, did you buy this tool? Maybe that's where the memory of a previous discussion is coming from.
Mark
* Loud is good, good is better!
Yup. I used to to tighten the end jack on CB's (your) EA20. If you need to use it let me know and I'll mail it to you.
Guitars and other stringed instruments: Washburn D10S, Washburn EA52SWCE, Washburn Cumberland J28SDL, Washburn D46S12, D'Aquisto Centura, Rover RM-50B Mando
Amps and Cabs: Behringer AT108, Firefly Tube Amph, Blackheart Little Giant BH5H, Shiner's Custom Cab v.1.0
". . . because without beer, things do not seem to go as well . . ." Brother Epp, Capuchin Monastery, Munjor, Kansas 1902
No, I don't need it, I was just trying to help someone out in another forum and I told him I recalled someone had a tool that did the trick - thanks for the offer though (Hint: new guitar doesn't require one of those tools).Originally Posted by luvmyshiner
Mark
* Loud is good, good is better!
A small basin wrench should work also.
Washburn J28SCE Cumberland
Washburn D10S
Today is the tomorrow you worried about yesterday
Friends Are Cherished Music Is Pleasure
Originally Posted by just strum
Well that just narrowed it down....its either an Electric....or it is not an Acoustic Electric :-)
Guitars: 2002 Les Paul Studio Limited Color's Edition | 2004 Greg Bennett Avion Les Paul Copy | S101 Telecaster project | 2004 Washburn D46 Acoustic
Amplification: Epiphone Valve Jr. Head and Cabinet | VOX AD30VT
Effects: Rocktron Delay | BBE Free Fuzz | Big Muff Pi | Boss Flanger | Bad Monkey | Jekyll and Hyde | Cry Baby Wah | Boss EQ | Behrenger TU300 Tuner |