Results 1 to 13 of 13

Thread: Bone nuts & saddles

Hybrid View

  1. #1
    Join Date
    Mar 2006
    Location
    Exterra Cognita
    Posts
    5,724
    Post Thanks / Like

    Default Bone nuts & saddles

    In another thread Mark said that a certain guitar would benefit from a bone saddle.

    I've seen many reviews where the benefits of a bone nut & saddle on an acoustic are discussed.

    What are Fretter's opinions about changing a nut & saddle to bone?

    1) Always make the change: it does wonders.
    2) Do it if you have extra cash: it'll help but it's not necessary.
    3) It's a preference thing: It has it's advantages & disadvantages.
    4) It depends on the composition of the current nut or saddle.
    5) Only do it if you are having issues.
    6) Don't do it. It's expensive & doesn't give you anything.
    7) Bone sucks.

    or something else?
    I pick a moon dog.

  2. #2
    Join Date
    Nov 2007
    Location
    Kent, UK
    Posts
    2,353
    Post Thanks / Like

    Default

    In my (small) experience of this, replacing plastic with bone or one of the better synthetics really opens up an acoustic. I first did this on a Sigma DR28 which was nice but a bit dark. I replaced both the saddle and nut as the nut had some tuning issues as well. The increase in volume and tonal detail was marked. I'd really recommend it but it depends on the guitar and bear in mind that the fit and finish of the saddle will probably have more impact than the material used. The nut material only affects the tone of the open strings so is more important if you live mostly in "country and western corner". I see no disadvantages to having a factory saddle replaced by a good repair guy by hand, the fit will always exceed the factory fitting.
    Electric: Fat strat > Korg PB > TS7 > DS1 > DD-20 > Cube 60 (Fender model)

    Acoustic: Guitar > microphone > audience

  3. #3
    Join Date
    Sep 2007
    Location
    High & Dry, Southern California
    Posts
    1,483
    Post Thanks / Like

    Default

    Mark's summed it up nicely. :

    I've never felt the need to replace a nut or saddle on an acoustic, because I've only bought guitars that I fell in love with, and part of that affinity was/is how they sounded. Why fix what's not broken?

    But, your point #5, tot, eventually popped up on my 37-year old Guild D-40. The nut slots had worn too wide & the saddle had worn away to the point of causing intonation issues. Since I liked how the guitar sounded, I replaced them with the same original stuff: good 'ol Ivoroid. Plastic.

    IMO, changing a nut on an acoustic is a pointless excercise of Type A personality : But, as Mark says, saddle material can make a big difference.

    Ah....but then there's the bridge pins : Plastic ones will bend & wear out fairly quickly, leading to string breakage at the ball end, or intonation issues from slipping upwards, not holding tight. These I'll change to tusq or ebony, if not right out of the gate, when the originals croak. They're much more durable than plastic and make a little bit of a difference in tone, but not a whole lot. Unless you want to really brighten up the tone of a 'dark-toned' or dead-toned acoustic...then try brass bridge pins for a dramatic change in tone.
    ^^
    AXES: Fender '81 The STRAT, '12 Standard Tele, '78 Musicmaster Bass, '13 CN-240SCE Thinline; Rickenbacker '82 360-12BWB; Epiphone '05 Casino, '08 John Lennon EJ-160E; Guild '70 D-40NT; Ovation '99 Celebrity CS-257; Yamaha '96 FG411CE-12; Washburn '05 M6SW Mando, '08 Oscar Schmidt OU250Bell Uke; Johnson '96 JR-200-SB Squareneck Reso; Hofner '07 Icon B-Bass; Ibanez '12 AR-325. AMPS: Tech 21 Trademark 10; Peavey ValveKing Royal 8; Fender Acoustonic 90, Passport Mini, Mini Tonemaster; Marshall MS-2 Micro Stack; Behringer BX-108 Thunderbird; Tom Scholz Rockman. PEDALS/FX: Boss ME-50; Yamaha EMP100; Stage DE-1; Samson C-Com 16 L.R. Baggs ParaAcoustic D.I; MXR EQ-10.

  4. #4
    Join Date
    Oct 2007
    Posts
    797
    Post Thanks / Like

    Default

    Not a lot to add but as a "acoustic guy" I feel obliged to jump in.

    Like wingsdad I replaced a nut on a old Guild. In my case the mid 70's D35 in my sig. Replaced it with Tusq and it made a big difference. Much better mid range, bit of a improvement in the bass and better volume. But, the existing nut had been messed with. On my Martin D2R the previous owner had goofed the saddle up. I called Martin and they sent me (no charge) the spec micarta saddle. Again a big difference.

    My experience is replacing even a good fitting plastic saddle with proper bone or Tusq will be an improvement. Bridge pins and nuts less so.

    A interesting test is to drop a plastic saddle or bridge pin on a hard table top, then do the same with Tusq or bone. Plastic will make a thawp kind of sound, the Tusq or bone will ping like a bell. Gives you a sense of the sonic difference.
    "The music business is a cruel and shallow money trench, a long plastic
    hallway where thieves and pimps run free, and good men die like dogs.
    There's also a negative side."
    --Hunter S. Thompson

    Guitars: Dean Sweet Wood 00R, Martin D2R, Guild D60, Guild D35NT, Morgan Monroe M30, OS baritone Uke

  5. #5
    Join Date
    Mar 2006
    Location
    Exterra Cognita
    Posts
    5,724
    Post Thanks / Like

    Default

    Thanks for the replies!

    You've brought up a question that I had.

    What if the nut is Tusq?

    In that case would the answer be leave it unless there are issues?

    The opinion seems to be that Tusq is as good as bone.

    How about rosewood saddles vs bone saddles on an archtop?
    I pick a moon dog.

  6. #6
    Join Date
    Oct 2007
    Posts
    797
    Post Thanks / Like

    Default

    Quote Originally Posted by tot_Ou_tard
    Thanks for the replies!

    You've brought up a question that I had.

    What if the nut is Tusq?

    In that case would the answer be leave it unless there are issues?

    The opinion seems to be that Tusq is as good as bone.

    How about rosewood saddles vs bone saddles on an archtop?
    Tusq vs. bone??? Hard to say, sort of Beatles vs. Stones. Both great but different. I've never done a side by side by side evaluation. People with better ears than mine would agree with spt. I think they are very close.
    "The music business is a cruel and shallow money trench, a long plastic
    hallway where thieves and pimps run free, and good men die like dogs.
    There's also a negative side."
    --Hunter S. Thompson

    Guitars: Dean Sweet Wood 00R, Martin D2R, Guild D60, Guild D35NT, Morgan Monroe M30, OS baritone Uke

  7. #7
    Join Date
    Feb 2008
    Posts
    61
    Post Thanks / Like

    Default

    In my experience, Tusq is brighter than bone. YMMV.
    Archtop bridges are entirely different animals. They are floating, not glued, and very few have a bone insert on top.
    Usually, archtops have a more focused sound, good for solo or comping work, with little sustain to muddy up single notes runs.
    In comparison, flatops sustain forever, more so with Tusq or bone, way less with ebony, rosewood or any wood saddle.

  8. #8
    Join Date
    Oct 2007
    Posts
    236
    Post Thanks / Like

    Default

    Quote Originally Posted by tot_Ou_tard
    1) Always make the change: it does wonders.
    2) Do it if you have extra cash: it'll help but it's not necessary.
    3) It's a preference thing: It has it's advantages & disadvantages.
    4) It depends on the composition of the current nut or saddle.
    5) Only do it if you are having issues.
    6) Don't do it. It's expensive & doesn't give you anything.
    7) Bone sucks.
    I'd point out that changing the saddle will be free fost most guitars; that is, it will cost whatever the new saddle costs. Current production Martin guitars, for example, have a drop-in saddle that you can just pull out with your fingers or some pliers with a rag wrapped around the sharp bits - then you just drop the new one in, and adjust it by removing whatever you need from the bottom with sandpaper on a flat surface, then re-stringing the guitar and check the new height.

    In my humble experience, it almost never pays off to replace the nut if it's working right, but it always pays off to replace the saddle with Tusq or bone if it's something else. Corian is also OK for most guitars (Martin used to use Corian a lot, and Gibson keeps using it for nuts). It makes sense if you think about it: a major open A chord uses 5 strings, of which 3 strings go over the 2nd fret, not the nut. The nut never comes into the equation for anything other than open chords, and even then it tends to influence only at most half the strings in a chord, if it influences much anything at all.

    But the saddle always comes into the equation. I've also found, reading William Cumpiano's fine book on acoustic guitars, that the saddle height (and in part, the material the saddle's made of) has a big influence on how loud the guitar is: a higher saddle means that the volume knob is turned up, with a lower saddle you turn it down.

    So - don't replace the nut unless it's broken or you can have it done for free; replace the saddle if it's too low, and not made of either bone or Tusq - and think about it twice if it's Corian and you don't hate the sound of your guitar. I believe that with guitars, just as with people, unnecessary surgery should be avoided.

  9. #9
    Join Date
    Sep 2007
    Location
    Northern Ohio - Near Cleveland - Home of the Rock and Roll Hall of Fame http://www.rockhall.com/
    Posts
    7,753
    Post Thanks / Like

    Default

    I'm going to jump in with my opinion.

    The changes in order of bang for the buck

    1) Saddle

    2) Pins

    3) Nut

    If you change two or all three at once, you will never know which one made the real difference. I hear people that changed the saddle and nut say what a big difference it made, but I believe it is the saddle that made 98% of the difference. The bone nut does add some aesthetics to it, but if it's white or off white you can't really tell the difference between it and a plastic nut. However, most bone nuts will hold up better to wear versus a plastic nut.

    Bone pins help the strings resonate and can offer aesthetics with some nice inlay.

    This is IMHO, but I am just plain right in what I say.

    Oh, and here is a guy that makes some very good product.

    http://www.guitarsaddles.com/
    Mark
    * Loud is good, good is better!

  10. #10
    Join Date
    Oct 2006
    Location
    Sun Valley, Idaho
    Posts
    10,955
    Post Thanks / Like
    Blog Entries
    1

    Default

    Quote Originally Posted by just strum
    This is IMHO, but I am just plain right in what I say.
    LOL! Gotta luv ya Strum. You crack me up.
    Steve Thompson
    Sun Valley, Idaho


    Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
    Amphs: Peavey Classic 30, '61 Fender Concert
    Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay


    love is the answer, at least for most of the questions in my heart. . .
    - j. johnson

  11. #11
    Join Date
    Feb 2008
    Location
    Mountains of Kentucky
    Posts
    1,382
    Post Thanks / Like

    Default

    Strum, man of truth. I vote Strum for President.
    I've been tinkering with the idea of changing my the saddle and pins on my Takamine. I have 2 strings G& B that resonate much longer than the others and can sometimes interfer with my next notes as I play. I just have this desire to change something to see if it helps.


  12. #12
    Join Date
    Sep 2007
    Location
    High & Dry, Southern California
    Posts
    1,483
    Post Thanks / Like

    Default

    Quote Originally Posted by street music
    ....I've been tinkering with the idea of changing my the saddle and pins on my Takamine. I have 2 strings G& B that resonate much longer than the others and can sometimes interfer with my next notes as I play. ...
    If the pins are plastic, which they probably are if stock Tak pins (c/b tusq or like that if a Japanese Tak), try wood ones for softer, more sound-absorbent string achoring...ebony would be harder, more durable, but you can get rosewood pins.

    Or you could try lighter gauge B & G strings to yield a bit less volume on those 2 culprits.
    ^^
    AXES: Fender '81 The STRAT, '12 Standard Tele, '78 Musicmaster Bass, '13 CN-240SCE Thinline; Rickenbacker '82 360-12BWB; Epiphone '05 Casino, '08 John Lennon EJ-160E; Guild '70 D-40NT; Ovation '99 Celebrity CS-257; Yamaha '96 FG411CE-12; Washburn '05 M6SW Mando, '08 Oscar Schmidt OU250Bell Uke; Johnson '96 JR-200-SB Squareneck Reso; Hofner '07 Icon B-Bass; Ibanez '12 AR-325. AMPS: Tech 21 Trademark 10; Peavey ValveKing Royal 8; Fender Acoustonic 90, Passport Mini, Mini Tonemaster; Marshall MS-2 Micro Stack; Behringer BX-108 Thunderbird; Tom Scholz Rockman. PEDALS/FX: Boss ME-50; Yamaha EMP100; Stage DE-1; Samson C-Com 16 L.R. Baggs ParaAcoustic D.I; MXR EQ-10.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •