isnt the orange wire on r14 ?
I cant see anything on pin 6 of the op amp ???
Im confused, are there jumpers on the other side of the board ?
Do you have a picture please.
EDIT!!!
I have done the mod as to how i can see it on the photo, I put it back together just enough to test it but have a couple of concerns
1. with the plastic knobs off and a lead plugged in i was holding the guitar side of the lead with one hand and turning the vol pot with the other to test the signal, it seemed a bit noisy and as i turned it up i got a bit of a shock, i cant remember in which hand tho. i put it pack together and played through it a bit with a guitar. tone is definately improved and i am yet to change the bias resister to 180 ohms. although when i touch any metal part of the guitar there is a slight pop noise ??? sort of what you get on cheaper strats where the hum goes away from touching it, it wasnt there before the mod.
any idea what ive done wrong ? (shock, pop noise)
2. it appears that the tone knob goes from 0 - 5 (like a guitar tone control) and then doesnt realy do anything from 5 - 10
sugest me some easy improvements forthis please
thanks