Warning: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in ..../includes/class_bbcode.php on line 2968
Squier Telecaster Custom - Mod Project
Results 1 to 14 of 14

Thread: Squier Telecaster Custom - Mod Project

  1. #1
    Join Date
    Aug 2006
    Location
    Northeast PA
    Posts
    111
    Post Thanks / Like

    Default Squier Telecaster Custom - Mod Project

    This was my first big mod project, and figured I would share it with anyone interested...

    To start off, I wanted a new guitar with a good single-coil sound, but at the same time, I had the bug to do some modding with coil-splitting-series/parallel. So I visited a Guitar Center, then eventually decided on getting the Squier Telecaster Custom. Let me say, that when I initially got this guitar I was blown away at the quality for $199. After having read the reviews of many of the guys on here, I realized a lot of the squiers are being made pretty well now.

    Unmodded review: For the money, this guitar was fantastic with a little setup. The neck is definitely its best point. Very smooth, and very fast. The frets were a tad bit sharp, but after hours of playing they smoothed out enough. The tuners are not the best, and I found that it went a little out of tune after sitting for a while, but expected at the price point. The witchhat knobs seemed a tad bit chinsey, and could come off if u gave them a slight tug. Other than that, everything on the body was great. The pots and switch were solid, the string-thru bridge is excellent, and best of all the pickups sounded great. The sound of this guitar is hard to pin down, because it has a humbucker sound, but at the same time, they are not very warm and retain some of that tele twang (Although not as twangy as a tele standard). Overall, I highly recommend the guitar if you are looking in the $200 range.

    The modding: Ok, here is where it gets interested. I realized that with a few upgrades, this guitar could go from "good for the price" to "great all around". So I started with the tuners. I swapped them out for mini Grovers. Went smooth, worked GREAT. The nut was made of a piece of plastic, so I decided that had to go. I bought a Tusq replacement nut made by Graphtech. The nut replacement went pretty smoothly, and was a lot easier than I thought. The new nut fit almost perfectly. Just needed some slight sanding on the sides, and it was smooth with the neck. Next I decided to gut the electronics, and replace everything with american made parts. So I put in 4 CTS pots, switchcraft input and 3-way, orange drop caps, and new wiring. Well let me say, this was a LOT of soldering. And really, it probably wasn't necessary, but I had a lot of time on my hands. Next, I decided that I was going to get new pickups which could be split. I decided on a pair of GFS pickups (FAT PAF's - $60-pair). Let me say, for the money these pickups are GREAT. One word of caution: If you plan to do coil-splitting with them, good luck with the wire colors (the color scheme they give you is all wrong, and required some desoldering and resoldering to get the switches right). I then installed two 3-way mini switches, 1 per pup. I wired them so that the three positions were "Series/Split/Parallel", which I got the schematics for from Seymour Duncan's site. Finally, I put new knobs on the 4 pots, deciding to go with the chrome dome-heads of traditional tele's. I left the original bridge/saddles because they are sturdy. Working on this guitar was a dream, because all of the guts are attached to the pickguard. Just take the pickguard off, and you have a wide-open space to work on whatever you want.

    The finished product: After all this work, she needed a setup, really bad. Finally it was finished. Was it worth all the work? ABSOLUTELLY! Not only did I have fun working on it, it sounds fantastic, and is extremely versatile. Played with single coil, it sounds pretty close to a tele standard. Played with full humbuckers, it gets a unique sound. Combine the two? even more unique, and very full sounding. Plugging it into my Vox it can do anything, from clean twang to bluesy single coil sound, to dirty full-out classic rock and beyond. And the quality of it now is superb. Stays in tune for days, and everything is solid. Squier guitars definitely are a great place to start for modding projects.

    Well, back to playing...

    Attachment 472
    Leonidas' Gear List:
    Electric Guitars - Agile AL-2800 (S.D. '59 B, Pearly Gates N), Squier Telecaster Custom (GFS FAT PAFs + Mods)
    Acoustic Guitars - Crafter ML-Rose, Epiphone PR-350CE
    Amps - VOX AD50VT, Epiphone Valve Jr. (Modded), Fender Blues Jr
    Pedals - Crybaby Classic w/ Fasel Inductor, Boss DS-1, Digitech Bad Monkey, Danelectro Cool Cat Chorus, Danelectro Fish & Chips EQ, Ibanez AW7

  2. #2
    Join Date
    Dec 2005
    Location
    Idaho (I-duh-ho)
    Posts
    12,581
    Post Thanks / Like

    Default

    Great project write up Leo. I was thinking along the same lines. The necks are awesome on these Tele's and you just showed us how to tame the rest of the beast and turn it into a purring Musicat.

    Thanks. Back to GASing for me...and just when I thought I was over it.

    "No Tele For you." - The Tele Nazi

    Ha! Tele-ish now inbound.

  3. #3
    Join Date
    Oct 2005
    Location
    Shelby NC
    Posts
    2,044
    Post Thanks / Like

    Default

    Would look nice next to my Black Squier Tele...

    Sounds like a nice project... Hmmm

    Any sound clips going through the different pickup settings available?

    Ofcourse the Humbuckers in a fender body don't sound anything like a Gibson right? or wrong? Can they have their screaming solos also?


    Jimmie Vaughan Strat , Squire 51
    Epi 56 GoldTop, SX "Vintage" Jazz Bass
    Zager 50, Guild GAD30R (Excellent)
    G-Dec 3 Thirty, Valve Junior & Cab
    Crate PowerBlock, Crate V33H
    Avatar Cabinet 2x12 Hellatones
    JamVox, Studio GX With Mods/Farm 2.0.



  4. #4
    Join Date
    Jun 2006
    Location
    Humboldt, Saskatchewan, Canada
    Posts
    1,399
    Post Thanks / Like

    Default

    Now THAT's what I'm talkin' about... awesome project, man. The more I look at those Squier Custom Tele's, the more I like 'em. It would look totally *****in' on stage too! All that black and chrome... it just oozes Rock & Roll attitude.

    *drooool*
    Electrics: Hagstrom Ultra Swede (Gold Eagle Burst) Gretsch 5120 Electromatic (Orange) Custom Nashville Blackout Telecaster (Black, Stat mid/neck p'ups; Lil Puncher (Modern Vintage) bridge p'up; Wilkinson Compensated Bridge w/ 3 brass saddles, Warmoth Vintage Modern Birdseye Maple Neck) Fender MIM Stratocaster (Blue Agave, Rosewood Fretboard, Fender Tex-Mex p'ups; GFS Trem/Block Kit) Highland Spitfire (semi-hollow, flame maple top w/ bubinga inlay)
    Acoustics:Washburn D10CEQSB, Yamaha FG160E
    Bass: Westone Spectrum ST, Warwick Rockbass Corvette Basic Active
    Amps: Vox NT15H/V112NT Night Train, Peavey Bandit 112, Hartke HyDrive 210C Bass Amp, Vox DA5


  5. #5
    Join Date
    Oct 2005
    Location
    , CANADA
    Posts
    482
    Post Thanks / Like

    Default

    Great post , Leonadis, what was the final monetary output..and how close to the Keef tone can you get ...6S9L
    --------------------------------------------------------------------------------
    Marty DiBergi: "This tasteless cover is a good indication of the lack of musical invention within. The musical growth of this band cannot even be charted. They are treading water in a sea of retarded sexuality and bad poetry."
    Nigel Tufnel: That's just nitpicking, isn't it?

  6. #6
    Join Date
    Aug 2006
    Location
    Northeast PA
    Posts
    111
    Post Thanks / Like

    Default

    Quote Originally Posted by Justaguyin_nc
    Would look nice next to my Black Squier Tele...

    Sounds like a nice project... Hmmm

    Any sound clips going through the different pickup settings available?

    Ofcourse the Humbuckers in a fender body don't sound anything like a Gibson right? or wrong? Can they have their screaming solos also?
    Yeah it was a great, fun project. The humbuckers don't sound quite like a gibson, no. The sound is thinner I guess u can say? But don't let that fool you. I can get great "screaming solo" tone. I unfortunately don't have any sound clips. I don't really have a good way to record... Any suggestions?
    Leonidas' Gear List:
    Electric Guitars - Agile AL-2800 (S.D. '59 B, Pearly Gates N), Squier Telecaster Custom (GFS FAT PAFs + Mods)
    Acoustic Guitars - Crafter ML-Rose, Epiphone PR-350CE
    Amps - VOX AD50VT, Epiphone Valve Jr. (Modded), Fender Blues Jr
    Pedals - Crybaby Classic w/ Fasel Inductor, Boss DS-1, Digitech Bad Monkey, Danelectro Cool Cat Chorus, Danelectro Fish & Chips EQ, Ibanez AW7

  7. #7
    Join Date
    Sep 2005
    Location
    Boston, MA
    Posts
    918
    Post Thanks / Like

    Default

    Great post Leonidas! I'm addicted to doing the same type of upgrades you've done to all my low budget guitars.

    I'm almost done with my JagMaster conversion. I've installed Schaller locking tuners, a Fender MIM bridge with a Callaham steel block, DiMarzio pickups, and Elixir strings. So far, it's killer! Now I just want to refinish it and install an American Deluxe Strat neck on it. Ooooohhhhh baby!!!
    "It's funny the way most people love the dead. Once you are dead, you are made for life." - Jimi Hendrix

  8. #8
    Join Date
    Feb 2006
    Location
    Uppah Noo Yawk
    Posts
    7,407
    Post Thanks / Like

    Default

    OK, lemme get this right--so you rewired your humbuckers to get series/split/parallel cabability? Man, THIS is getting kind of scary now!

    But I sure wouldn't use the phrase "working on this guitar was a dream" with my Dot. Major pain in the butt pulling the entire wiring harness thru the f-hole!
    DVM's Ever-Expanding Gear List:

    Guitars - W-A-A-A-Y-Y too many to list. Check 'em all out HERE

    Amps & Cabs - "Kap'n Kerrang-aroo" BYOC 18W TMB kit amp head; Mojave Coyote head; Fender Hot Rod Deluxe Lacquered Tweed Ltd. Ed.; Allen Sweet Spot kit amp; BYOC Tweed Royal kit amp; Epiphone Valve Jr. combo + mods; Drive 2x12 cab / Celestion G12M Greenback + G12H30; AB Custom Audio 1x12 cab / Celestion Alnico Blue

    Pedals/Effects - ZILLIONS, including DVM's Home-built Pedals - See some HERE and HERE, TOO!

    DVM's Gear Photos
    Visit MY WEBSITE!



  9. #9
    Join Date
    Aug 2006
    Location
    Northeast PA
    Posts
    111
    Post Thanks / Like

    Default

    HAHA yeah, the similiarities are inceasing. Looks like you had a nice project with your Dot. Man now thats a guitar I've been eyeing up for a while. How do you like it? I like how you rigged the 3-way switch on the pickguard. I orginally wanted to do this project with my Agile LP copy, but I just love the finish and sound way too much to drill holes.
    Leonidas' Gear List:
    Electric Guitars - Agile AL-2800 (S.D. '59 B, Pearly Gates N), Squier Telecaster Custom (GFS FAT PAFs + Mods)
    Acoustic Guitars - Crafter ML-Rose, Epiphone PR-350CE
    Amps - VOX AD50VT, Epiphone Valve Jr. (Modded), Fender Blues Jr
    Pedals - Crybaby Classic w/ Fasel Inductor, Boss DS-1, Digitech Bad Monkey, Danelectro Cool Cat Chorus, Danelectro Fish & Chips EQ, Ibanez AW7

  10. #10
    Join Date
    Aug 2006
    Location
    Northeast PA
    Posts
    111
    Post Thanks / Like

    Default Sound clips

    Ok, I recorded some samples... This is my very first attempt at recording myself, so sorry in advance for anything that sounds like junk!

    This is recorded with the Line Out on my Vox into my computer. I don't think the Line Out sounds near as good as the amp speaker, but thats the only way I was able to record. All of them are done using the bassman tweed model.

    The first set are a clean tone and they each are some open chords, then some noodlin around with each of the settings in the order Split, Parallel, and then Series.
    Attachment 497
    Attachment 498

    The second set is with the gain cranked and they are Split, then Series.
    Attachment 500
    Attachment 499

    Let me know what you guys think.
    Last edited by Leonidas; August 31st, 2006 at 01:34 PM.
    Leonidas' Gear List:
    Electric Guitars - Agile AL-2800 (S.D. '59 B, Pearly Gates N), Squier Telecaster Custom (GFS FAT PAFs + Mods)
    Acoustic Guitars - Crafter ML-Rose, Epiphone PR-350CE
    Amps - VOX AD50VT, Epiphone Valve Jr. (Modded), Fender Blues Jr
    Pedals - Crybaby Classic w/ Fasel Inductor, Boss DS-1, Digitech Bad Monkey, Danelectro Cool Cat Chorus, Danelectro Fish & Chips EQ, Ibanez AW7

  11. #11
    Join Date
    Aug 2006
    Location
    Athens, Greece
    Posts
    287
    Post Thanks / Like

    Default

    Really good job you've done there!

    I liked the sound of the clips, keeping in mind the "Line Out" issue (I had a AD30VT and I know).

    I think this Squier sounds very much like a SG, which is logical, since the woods/body size and the electronics are somewhat similar. (Agathis is similar to Mahogany sonically).

    All in all you have a guitar with very interesting sound for pocket money!

    Congrats!

  12. #12
    Join Date
    Aug 2006
    Location
    Northeast PA
    Posts
    111
    Post Thanks / Like

    Default

    Anyone else take a listen??

    I'm interested to hear what you guys think
    (thanks abraxas! )
    Leonidas' Gear List:
    Electric Guitars - Agile AL-2800 (S.D. '59 B, Pearly Gates N), Squier Telecaster Custom (GFS FAT PAFs + Mods)
    Acoustic Guitars - Crafter ML-Rose, Epiphone PR-350CE
    Amps - VOX AD50VT, Epiphone Valve Jr. (Modded), Fender Blues Jr
    Pedals - Crybaby Classic w/ Fasel Inductor, Boss DS-1, Digitech Bad Monkey, Danelectro Cool Cat Chorus, Danelectro Fish & Chips EQ, Ibanez AW7

  13. #13
    Join Date
    Feb 2006
    Location
    Uppah Noo Yawk
    Posts
    7,407
    Post Thanks / Like

    Default

    Yup, the line-out recording method (been there, done that) with the AD30VT definitely leaves a lot to be desired, but the clips show off the differences between the p'up configurations quite well, I think. That's quite a broad range of tones you end up with, for a modest investment in 4-conductor p'ups, plus a couple of switches & some soldering work. Nice job!

    As long as you have access to a PC with a decent sound card in it, all you really need to do is pick up a modestly priced mic to record with. I got a Behringer XM8500 from Musiciansfriend.com for $20, and it does a great job for an amateur like me. I use the freeware Audacity program for capture and editing. The results sound tons better than the line-out method did!

    BTW, I never responded to your question re: how I liked my Epi Dot. Answer: LOVE IT!!! This guitar just seems to "fit" me like a glove. I find myself playing it more than either my LP or my Strat lately. Part of that is because (1) it's "newer" to me, and (2) the pickup mods I've done make it a lot of fun to fool around with. But it's also because it feels so comfortable and natural for me to play. I know that's a very subjective thing, but feel is such an important part of playing guitar, and the Dot just feels great to me. Like wearing a comfortable old flannel shirt....
    DVM's Ever-Expanding Gear List:

    Guitars - W-A-A-A-Y-Y too many to list. Check 'em all out HERE

    Amps & Cabs - "Kap'n Kerrang-aroo" BYOC 18W TMB kit amp head; Mojave Coyote head; Fender Hot Rod Deluxe Lacquered Tweed Ltd. Ed.; Allen Sweet Spot kit amp; BYOC Tweed Royal kit amp; Epiphone Valve Jr. combo + mods; Drive 2x12 cab / Celestion G12M Greenback + G12H30; AB Custom Audio 1x12 cab / Celestion Alnico Blue

    Pedals/Effects - ZILLIONS, including DVM's Home-built Pedals - See some HERE and HERE, TOO!

    DVM's Gear Photos
    Visit MY WEBSITE!



  14. #14
    Join Date
    Aug 2006
    Location
    Northeast PA
    Posts
    111
    Post Thanks / Like

    Default

    Quote Originally Posted by duhvoodooman
    As long as you have access to a PC with a decent sound card in it, all you really need to do is pick up a modestly priced mic to record with. I got a Behringer XM8500 from Musiciansfriend.com for $20, and it does a great job for an amateur like me. I use the freeware Audacity program for capture and editing. The results sound tons better than the line-out method did!
    Hey thanks a ton for the info! The line-out is pretty bad, as you well know. I'll definitely pick up a cheap mic, like you recommend. For how much one costs, that sounds like its well worth it. Thanks again for the info.

    Quote Originally Posted by duhvoodooman
    BTW, I never responded to your question re: how I liked my Epi Dot. Answer: LOVE IT!!! This guitar just seems to "fit" me like a glove. I find myself playing it more than either my LP or my Strat lately. Part of that is because (1) it's "newer" to me, and (2) the pickup mods I've done make it a lot of fun to fool around with. But it's also because it feels so comfortable and natural for me to play. I know that's a very subjective thing, but feel is such an important part of playing guitar, and the Dot just feels great to me. Like wearing a comfortable old flannel shirt....
    Awesome! I've been drooling over the Dot for a long while.. That'll more than likely be my next guitar purchase, but first I think I have my sights set on a valve junior. I think I will really like the Dot. I tend to like the gibson-style guitars much more than fenders. My agile is still like "going home" when I pick it up. Still have loads of fun with my tele tho...
    Leonidas' Gear List:
    Electric Guitars - Agile AL-2800 (S.D. '59 B, Pearly Gates N), Squier Telecaster Custom (GFS FAT PAFs + Mods)
    Acoustic Guitars - Crafter ML-Rose, Epiphone PR-350CE
    Amps - VOX AD50VT, Epiphone Valve Jr. (Modded), Fender Blues Jr
    Pedals - Crybaby Classic w/ Fasel Inductor, Boss DS-1, Digitech Bad Monkey, Danelectro Cool Cat Chorus, Danelectro Fish & Chips EQ, Ibanez AW7

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •