Reply With QuoteI have a 1-Spot power adaptor and "chain" connector. Lots of power for my RP-80 and 3 or 4 other pedals as needed. Picked it up for about $30 CDN.
Regular Fretter
Daisy chaining pedals
What do you use to daisy chain pedals? I've got a PSA 120T adapter & I would like to run several pedals off of it. I don't need a pedal board as the pedals are staying in my basement.
This looks interesting:
http://www.pedalboard.net/cables.htm#
Any other suggestions?
I pick a moon dog.
Regular Fretter
I have a 1-Spot power adaptor and "chain" connector. Lots of power for my RP-80 and 3 or 4 other pedals as needed. Picked it up for about $30 CDN.
Electrics: Hagstrom Ultra Swede (Gold Eagle Burst) Gretsch 5120 Electromatic (Orange) Custom Nashville Blackout Telecaster (Black, Stat mid/neck p'ups; Lil Puncher (Modern Vintage) bridge p'up; Wilkinson Compensated Bridge w/ 3 brass saddles, Warmoth Vintage Modern Birdseye Maple Neck) Fender MIM Stratocaster (Blue Agave, Rosewood Fretboard, Fender Tex-Mex p'ups; GFS Trem/Block Kit) Highland Spitfire (semi-hollow, flame maple top w/ bubinga inlay)Acoustics:Washburn D10CEQSB, Yamaha FG160E
Bass: Westone Spectrum ST, Warwick Rockbass Corvette Basic Active
Amps: Vox NT15H/V112NT Night Train, Peavey Bandit 112, Hartke HyDrive 210C Bass Amp, Vox DA5
Regular Fretter
I also use the 1-Spot. It runs six pedals.
Guitars:
Electric: Washburn HB-30, Squier Tele Custom Deluxe, Jay Turser Strat.
Acoustic: Seagull S6.
AMPs: VOX AD30VT, Peavey Envoy 110.
Modelers: V-AMP 2, Digitech RP-100A.
Pedals: Boss RC-2 Loop Station, Boss CE-5 Chorus Ensemble, Digitech Bad Monkey, Ibanez DE7 Delay/Echo, DOD VFX40B 7-Band Graphic EQ, Ibanez CS-5 Super Chorus.
Regular Fretter
Yes, I was looking at the 1-spot after I made my post. It sounds good. Thanks.
I pick a moon dog.
Luke Skyrawker
What you end up using for power might depends on how many pedals you'll be running and their power consumption.
Usually you'll have adequate power with the PSA120's 200 mA output if running 2-6 regular Boss type pedals. However if you chain a lot of pedals together and they draw more or close to 200 mA when they are all on then you will notice the degradation in the quality of your guitar sound and effects sound.
Ibanez makes the AC309 adapter that puts out 300 mA. Or another option would be to have 2 Boss PSA120's. If you are running or going to run a Looper pedal then you may want it on it's own supply as they tend to draw a lot of power and so do some boutique pedals.
Just some food for thought.
"No Tele For you." - The Tele Nazi
Ha! Tele-ish now inbound.
Regular Fretter
Spud, yeah I bought the PSA 120 to power my RC-2 looper. It draws 50 mA
so there should be plenty of overhead to run some pedals.
The 1-Spot does look good: 1700mA!
Last edited by tot_Ou_tard; December 2nd, 2006 at 06:49 PM.
I pick a moon dog.
Posting Permissions