I'm thinking of this guy here: http://store.guitarfetish.com/wivitrpoarst.htmlOriginally Posted by ShortBuSX
I know I'll have to fill and drill the body for the different screw spacing. I am thinking about modifying the holes in the trem though.
I'm worried that MIA spacing (2 7/32") or the in between that some aftermarket trems have (2 1/8") will leave my E strings too close to the edge of the fret board. But if MIAs have the same neck width, at least in the pocket, which it appears they do, then it shouldn't be a problem