Quote Originally Posted by Suhnton
I think the yellow ones are mylar caps. As for the 0.02uF cap, if you're talking about the one at the base of the input transistor, then it's about right. The value I have is 0.027uF (close enough).
The 0.02 cap I'm talking about is the yellow one right above the numbers 12 and 13 (12 is where the red wire connects) in the picture labeled "TS-9 Modifications". Yes, in the schematic it looks like it's connected directly to the input transistor.

Anyway, yes, I know the value is 0.02uF, both from the schematic and from reading what it says on the capacitor in my TS9 reissue pedal, my question was: do you know if the Keeley mod uses the same value for that capacitor (if you look at the second picture I've posted in my initial post, you can see that the yellow cap has been replaced with a red metal film cap), or if the mod uses a different value for the replaced capacitor?