I think the yellow ones are mylar caps. As for the 0.02uF cap, if you're talking about the one at the base of the input transistor, then it's about right. The value I have is 0.027uF (close enough).
Regular Fretter
I think the yellow ones are mylar caps. As for the 0.02uF cap, if you're talking about the one at the base of the input transistor, then it's about right. The value I have is 0.027uF (close enough).
Guitars: Epiphone SG-400 Custom; Epiphone Firebird V; 1996 Gibson LP Standard; Avion 4; Yamaha FG-301B acoustic
FX: TS-808; Big Muff (Triangle Version); Red Llama; Green Ringer Octave Up (Clones); Maxon Phaser; Maxon Compressor; Tremulus Lune Tremolo; Line 6 POD II
Amp: (Somewhere in another country) Hiwatt 100W head, Marshall 4x12 cab
My noise here
Regular Fretter
The 0.02 cap I'm talking about is the yellow one right above the numbers 12 and 13 (12 is where the red wire connects) in the picture labeled "TS-9 Modifications". Yes, in the schematic it looks like it's connected directly to the input transistor.Originally Posted by Suhnton
Anyway, yes, I know the value is 0.02uF, both from the schematic and from reading what it says on the capacitor in my TS9 reissue pedal, my question was: do you know if the Keeley mod uses the same value for that capacitor (if you look at the second picture I've posted in my initial post, you can see that the yellow cap has been replaced with a red metal film cap), or if the mod uses a different value for the replaced capacitor?
Posting Permissions
Reply With Quote