I was hoping a fellow toneport owner using Podfarm could answer this question. On the mixer screen, what is the optimal signal level for the Rec. Send Processed out? When I play my Strat, the meter registers to about the -10 line, no higher. This is with the send level fader all the way up, the volume knob all the way up on the guitar, and the output level knob all the way up on the podfarm screen. The manual says to use "a nice hot signal" without specifying what that really is. There is an 18db boost button, but if I use this the meter goes all the way into the red and I would need to back the fader down. So, what number should I shoot for on this meter?