Results 1 to 12 of 12

Thread: Guitar/effects cables, switching from straight in to right angle jack - help please

  1. #1
    Join Date
    Oct 2006
    Location
    Sun Valley, Idaho
    Posts
    10,955
    Post Thanks / Like
    Blog Entries
    1

    Default Guitar/effects cables, switching from straight in to right angle jack - help please

    As I build my new pedal board, (See here for description and pics http://www.thefret.net/showthread.ph...al-Board-Build ) I find I want to change the jacks on a couple of my perfectly good cables from straight in to right angle. Particularly the guitar cable into the tuner on the upper right, and the return cable to the amph coming out of my MXR Carbon Copy on the lower left. Both are perfectly good cables, and it would be nice not to have to buy new ones. Also, the straight in going into the input of the M9. Though that one is a little too long anyway, and I may just buy a new live wire right to right for that one.

    So anyway, I plan on switching out a couple jacks. I have a small soldering iron and some solder (I am going to go with solder and not solderess). I plan on getting a couple switchcraft jacks. http://tubedepot.com/p-226.html or stop in to Guitar Center when I am in Boise on Tuesday and pick a couple up there. I found a decent video demonstrating the soldering process.



    But this vid does not address the blue sheathing that comes out of the jacks on my cables (see pic in pedal board thread). Can I just skip that part? If I shouldn't skip it, how is that stuff applied?

    Any other hints would be appreciated too. DVM, other modders? Thanks!
    Steve Thompson
    Sun Valley, Idaho


    Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
    Amphs: Peavey Classic 30, '61 Fender Concert
    Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay


    love is the answer, at least for most of the questions in my heart. . .
    - j. johnson

  2. #2
    Join Date
    Oct 2006
    Location
    Sun Valley, Idaho
    Posts
    10,955
    Post Thanks / Like
    Blog Entries
    1

    Default

    Here is another good vid on repairing/replacing a jack. It still does not deal with the heat shrink type wrap that comes out of the jack for an inch or two on my cables though:



    This one by the same outfit shows the heatshrink wrap used when building cables from Mogami cable and parts from scratch.



    I guess I can just combine the two build techniques. Thoughts appreciated from any of you that have worked with your own cables. Otherwise, I hope these vids help someone else considering doing the same. :-)
    Steve Thompson
    Sun Valley, Idaho


    Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
    Amphs: Peavey Classic 30, '61 Fender Concert
    Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay


    love is the answer, at least for most of the questions in my heart. . .
    - j. johnson

  3. #3
    Join Date
    Oct 2008
    Location
    Clear Lake, Texas
    Posts
    5,413
    Post Thanks / Like
    Blog Entries
    1

    Default

    The blue sheathing sounds like an insulator for your cable's center conductor. Be careful not to melt it.


    An FYI on a similar subject:
    I bought a Lava solderless cable kit and so far haven't had any luck with it. The problem is me. I've built a few 6" right angle cables, but they aren't working. I've torn them apart and re-terminated them, and still no luck. In my past jobs I've terminated tens of thousands of cables of all kinds, and even have a NASA flight hardware soldering and cabling certificate, and I still can't get these damn cables to work!

    The Pro Co patch cables from Sweetwater are a little pricey, but they work great.

  4. #4
    Join Date
    Oct 2006
    Location
    Sun Valley, Idaho
    Posts
    10,955
    Post Thanks / Like
    Blog Entries
    1

    Default

    I will probably just get a couple more live wire patch cables for the shorties. They work fine for me. the longer ones I have, I don't really want to have to buy over. They work fine too. So replacing the jacks should work fine. I will follow the solder method in those vids I find if I don't just buy new cables altogether. The blue stuff is heat shrink, and I think both insulates and protects the connection once it is soldered together, and provides stress relief from bending. It goes on with a heat gun as shown in the last vid I linked above.

    It would be a fun project, but if I am in almost the cost of a new live wire cable with parts, I may just buy the cables and have my current ones as back ups. They have lifetime warranties on them too that might be voided if I mod them.
    Steve Thompson
    Sun Valley, Idaho


    Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
    Amphs: Peavey Classic 30, '61 Fender Concert
    Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay


    love is the answer, at least for most of the questions in my heart. . .
    - j. johnson

  5. #5
    Join Date
    May 2009
    Posts
    392
    Post Thanks / Like

    Default

    Just my opinion, but if you're re-doing your board why not get cables that you'll love for years at the same time? Get some GeorgeL's, make them whatever size/configuration/length you want, and bask in sonic purity. George Lewis knew what the hell he was doing, for sure.
    "Always go heavy on the effects and try to blind the audience with expensive gear." - hubberjub

    I mean, no offense, but I don't really see why, like guitar players from Creed, or something like that, are on the cover of guitar magazines. Almost anybody can sit down and learn to play those songs.
    Dweezil Zappa

  6. #6
    Join Date
    Oct 2006
    Location
    Sun Valley, Idaho
    Posts
    10,955
    Post Thanks / Like
    Blog Entries
    1

    Default

    Well, most of my cables work just fine. I am not sure I want to invest in a $80 plus kit when most of the stuff works. Also, isn't George L stuff solderless? Looks to me that the same problems that can happen with the Lava kits can happen with those too.
    Steve Thompson
    Sun Valley, Idaho


    Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
    Amphs: Peavey Classic 30, '61 Fender Concert
    Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay


    love is the answer, at least for most of the questions in my heart. . .
    - j. johnson

  7. #7
    Join Date
    May 2009
    Posts
    392
    Post Thanks / Like

    Default

    GeorgeL stuff is all waranteed forever, so no worries about non-working parts.

    I still use some Mogami, Monster, PlanetWaves, etc. but IMO the GeorgeL's are worth the investment. Eric Johnson uses GeorgeL's, and he's a cork-sniffing tone-snob of the 20th degree (although I don't like his music too much)
    "Always go heavy on the effects and try to blind the audience with expensive gear." - hubberjub

    I mean, no offense, but I don't really see why, like guitar players from Creed, or something like that, are on the cover of guitar magazines. Almost anybody can sit down and learn to play those songs.
    Dweezil Zappa

  8. #8
    Join Date
    Oct 2006
    Location
    Sun Valley, Idaho
    Posts
    10,955
    Post Thanks / Like
    Blog Entries
    1

    Default

    A lot of people swear by them I know. I will probably at least look at their website to see what it would cost to get going with them.
    Steve Thompson
    Sun Valley, Idaho


    Guitars: Fender 60th Anniversary Std. Strat, Squier CVC Tele Hagstrom Viking Semi-hollow, Joshua beach guitar, Martin SPD-16TR Dreadnought
    Amphs: Peavey Classic 30, '61 Fender Concert
    Effects and such: Boss: DS-1, CE-5, NS-2 and RC20XL looper, Digitech Bad Monkey, Korg AX1G Multi-effects, Berhinger: TU100 tuner, PB100 Clean Boost, Line 6 Toneport UX2, Electro Harmonix Little Big Muff Pi, DuhVoodooMan's Rabid Rodent Rat Clone, Zonkin Yellow Screamer Mk. II, MXR Carbon Copy Delay


    love is the answer, at least for most of the questions in my heart. . .
    - j. johnson

  9. #9
    Join Date
    Oct 2008
    Location
    Clear Lake, Texas
    Posts
    5,413
    Post Thanks / Like
    Blog Entries
    1

    Default

    I built a longer GeorgeL cable, and it worked perfectly. I should have gone with them for my patch cable kit.

  10. #10
    Join Date
    Jun 2008
    Location
    Down Under
    Posts
    1,706
    Post Thanks / Like

    Default

    Quote Originally Posted by sunvalleylaw View Post
    .. The blue stuff is heat shrink, and I think both insulates and protects the connection once it is soldered together, and provides stress relief from bending. It goes on with a heat gun as shown in the last vid I linked above.
    Also, as long as you don't use black heat shrink, leaving a couple of inches hanging out the plug (as per your pedal board pics) also serves as a handy place to write things like "SEND" and "RETURN" and "AMP" and stuff. At least that's what I do

    Also, in a pinch you can shrink it with a lighter, the barrel of a soldering iron, a hair dryer and matches. (I think that about covers all things I've tried to shrink heat shrink with) I have a cheap little gas powered heat gun specifically made for the job now though.

    Also, FWIW, I'm all about soldered cables. Solder-less feels like a solution to a problem that I don't have (i.e. not being able to solder)

  11. #11
    Join Date
    Jun 2009
    Location
    Mechanicsburg, Pennsylvania, U.S.A.
    Posts
    923
    Post Thanks / Like

    Default

    While I readily admit my addiction to the smell of solder smoke, I also have to admit that the George L solder-less cables I have used have never been a problem, and yes, they do sound outstanding if you like a low capacitance cable. Nothing gets lost. The first time I started using one it made me realize there was nothing wrong with the pickups and pots I was planning on replacing in a particular guitar, the problem was the tone sucking Monster cablesI was using. Since then I have been very particular about cables.
    If someone is typically playing through a bunch of pedals and a buffer I'm not sure that the clarity of something like a George L would be as noticeable or as important, but if you like going straight in to your amp and use the volume and tone controls on it to shape your sound, you'll love the difference.
    In any case, the solder free design is simple and quick and always worked fine for me,

  12. #12
    Join Date
    Jan 2010
    Location
    Chicagoland
    Posts
    1,063
    Post Thanks / Like

    Default Guitar/effects cables, switching from straight in to right angle jack - help please

    Steve et al... GeorgeL is idiot proof. By that I mean that they worked for me and I made a half dozen.

    Tools needed:
    1) wire cutters
    2) ......

    Right well, maybe pliers for little extra oomph...that last quarter turn. Seriously, I'm astounded any other product even survives with this stuff in the market.
    "It's never too late to be what you might have been" - Eliot

    Guilars: '02 Heritage H-535 ASB; '04 Larrivée LV-03 w/Fishman Blend; '95 Washburn/Bourgeios D-55SW Cherokee
    Amphs: Boogie DC-2; DVM/BYOC Tweed Champlifier; Marshall AS50D
    Currently on Board: Ditto Looper; Boss TU-2; EB VP Jr; crybaby; DVM Spring Fever; DVM Mini Klone, Brena Effects Cali-Tremor tremolo; Strymon El Capistan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •