Anybody Use Rail Pickups In Your Strat?

[Bloozcat]

I think that might be the best way to go, Duffy, although I would have thought (my preference) the rail would have been in the bridge position. The obvious advantage of this is to put the beefier, thicker, rail in what for many, is the most unusable pickup position on a Strat. Additionally, it's a way to get more of a humbucking tone without having to route a S/S/S body for a full size humbucker (as is also true for the other two positions as well).

If one can afford to do so, the ideal situation is to have several Strats, all set up in different configurations. I had a set of Joe Barden S pickups in a Strat once. They sounded great, but not great like single coils should. They had a character all their own. I regret selling them instead of saving them for another Strat set up just for that tone.

[Duff]

I thought of putting the rail in the bridge but decided to try it in the neck and it sounds really great.

The JB Jr sounds great in the bridge too.

I thought about switching them around some day but for now it sounds really good in all three positions, plus 2 and 4. It is a neat combination. I could have went with all rails but I wanted to try something that would give me more variety of tone and still have pups that work well together.

I have a HWY 1 fat strat with stock pups. They sound good. I'm sure I could improve upon them though.

That hot rail sounds surprisingly good in the neck. Because it really beefs up that affinity, could be why.



Duffy

[tot_Ou_tard]

Are rails & blades the same thing?

There are single blade designs like the Charlie Christian type. Not exactly a strat on steroids type of sound though.

[aeolian]

Are rails & blades the same thing?

I think they are. My Godin has blades in the neck and middle. It does a decent job sounding like a Strat. I'm not a purist so sounding exactly like a Strat is not that high a priority.

[Bloozcat]

Are rails & blades the same thing?

There are single blade designs like the Charlie Christian type. Not exactly a strat on steroids type of sound though.

Yeah, blades were what they were called when they first came out. Now, they seem to be called rails most of the time.

When I bought my Bill Lawrence L-150 back in the mid 70's, it was called a blade (single blade), because there were two stacked coils. Later, there were dual blades when some construction went to side-by-side coils.