Originally Posted by
duhvoodooman
Yeah, but you're going to need to figure out a way to make them height-adjustable, because the screw tabs on a 'bucker are mounted way down at the bottom, rather than up high like a Strat or tele p'up. With those, you just need to have a spring or rubber tubing compressible spacer. With a humbucker, when you adjust the height, you're actually moving it relative to the mounting ring, not the guitar body per se.
I know but I was assuming that the pickup would be close enough to the strings as an approximation when screwed into the body. I'm not familiar with an EBMM body what is that? The only humbuckers I've seen without rings are like on some SGs.
Guitars/Bass - MIM Fender Classic 50s Strat, MIM Fender Standard Strat, Squier Classic Vibe 50s Tele, Gibson Les Paul Studio, Epi '56 Gold Top Les Paul, Martin DSR acoustic, Sigma Martin Auditorium electric/acoustic, Squier Jazz Bass.
Amps/Cabinets/Modelers - Model 2558 50 watt Marshall Silver Anniversary Jubilee combo w/ Celestion Vintage 30s, 4x12 Marshall cabinet w/25 watt Greenback Celestions, Fender Blues Junior w/ a couple of Billm mods, Line 6 POD 2.0, Roland Micro Cube
Pedals/Effects - Cry Baby Classic Wah, Boss TU-2, Boss NS-2, Boss RC-2 Loop Station, Ross Compressor, MXR Micro Amp, Danelectro FAB Echo, Danelectro FAB Chorus, Danelectro Chicken Salad, Marshall Guv'nor Plus, Marshall Echohead, Duhvoodooman's Zonkin' Yellow Screamer, Digitech Digiverb, Digitech Bad Monkey, Dunlop Fuzz Face, Homemade Loop Bypass pedal, Duhvoodooman's Sonic Tonic (Maxon SD-9 clone +), Voodoo Labs Superfuzz