I see no problem in doing exactly that. I've just soldered a short polarity swap lead together, but now that you mention it, going inside the casing would be much more convenient in the long run and does exactly the same job.
Bronze Supporter
I see no problem in doing exactly that. I've just soldered a short polarity swap lead together, but now that you mention it, going inside the casing would be much more convenient in the long run and does exactly the same job.
Dee
"When life's a biatch, be a horny dog"
Amps: Marshall JVM 410H w/ Plexi Cap mod, Choke Mod & Negative Feedback Removal mod, 4x12", Behringer GMX110, Amplitube 3/StealthPedal
Half a dozen custom built/bastardized guitars all with EMG's, mostly 85's, Ibanez Artwood acoustic & Yamaha SGR bass, Epiphone Prophecy SG, Vox Wah, Pitchblack tuner plus assorted pedals, rack gear etc. for home studio use.
Regular Fretter
I've been thinking about this while i walked the dog today . If I swapped the input voltage connections around wouldn't this put 9v directly onto the pedal chassis which may not be a good idea.
Bronze Supporter
IF it's an all metal jack, yeah...and may indeed be the reason it is the way it is arranged...um, is the ground then the chassis? But if it's a plastic Boss type jack it won't change a thing. Good catch though...Originally Posted by Geraint Jones
Dee
"When life's a biatch, be a horny dog"
Amps: Marshall JVM 410H w/ Plexi Cap mod, Choke Mod & Negative Feedback Removal mod, 4x12", Behringer GMX110, Amplitube 3/StealthPedal
Half a dozen custom built/bastardized guitars all with EMG's, mostly 85's, Ibanez Artwood acoustic & Yamaha SGR bass, Epiphone Prophecy SG, Vox Wah, Pitchblack tuner plus assorted pedals, rack gear etc. for home studio use.
Posting Permissions
Reply With Quote