Another way to modify the amp would be to use the tone pot for a volume pot and the volume pot for a gain pot. This involves no cuts just jumpers and removing components with one being replaced (C24)
1) Remove PCB from chassis
2) Remove R13 C26 C24( to replace with 47nf for more bass or keep as is if you wish) C6 C5 C4 and R27
3) Replace C24 with a 47nf
4) Jumper junction of C6 C5 and CW2 (tone pot) to junction of R27 and R15
That’s it now the volume pot will control the gain of 2nd stage op amp for overdrive and the tone pot will control the volume.