• You're one step from joining Guitar Discussion Forum - The Fret.
    Create a free account to post, follow threads, and never miss an update.  Sign up free →

Eastwood Tuxedo: I'm smitten

Guitar Discussion Forum - The Fret

Help Support TheFret.net:

I gotta keep myself away from the Eastwood website. Those things are just too damn sweet!
 
They say it's a tap and not a split. It's possible to coil-tap a single-coil pickup; I just haven't ever heard of it being done. What a beautiful guitar.
 
Ro3b said:
They say it's a tap and not a split. It's possible to coil-tap a single-coil pickup; I just haven't ever heard of it being done. What a beautiful guitar.
When you tap a single coil do you effectively remove some of the windings from the circuit?

Yes, it's too rich for my blood, but if I had the scratch, I'd buy it in a heartbeat.

Here's a clip of the RBC



Riley said:
Sweet guitars, they sound great!!!!! 8)

Hey Riley, are you talking about the Tuxedo, the RBC, or Eastwood guitars in general?

Have you'd played a Tuxedo?

Another Tuxedo clip:

 
You can't tap a single coil pickup (P90s are single coils) unless it's a hum-canceling one. Then tapping it will tap the dummy coil and make it a true single coil once again, but eliminate any hum cancellation.
 
marnold said:
You can't tap a single coil pickup (P90s are single coils) unless it's a hum-canceling one. Then tapping it will tap the dummy coil and make it a true single coil once again, but eliminate any hum cancellation.
The site says that the pups on the Eastwood RBC are P90s and that each of the three pups has a 3-way toggle switch: Off/On/Coil-Tap.

Why can't you just connect a wire, say, half-way through the windings and another at the end of the windings as usual. Depending on which is connected to the circuit you get a hotter, midrangy P90 sound or a thinner more standard single coil sound?

This is what I think R03b is talking about.

Come to think of it, wouldn't it be possible to wire up a continuously variable connection & so bring windings in & out of the circuit at will? Dial it down for vintage underwound single-coil sounds, or up for xtra-hot P90 snarl.

I'll bet it could be done.
 
mrmudcat said:
Have you seen this?
http://www.stellartone.com/Page.asp?NavID=76

Might be easier:Dude:

Nope, I haven't. It looks cool.

I wasn't planning on building a continuous tap only wondering whther such a thing was possible.

mrmudcat said:
On the model you question.I will say these(pups) are stacked as mentioned above and that is what the coil tap is referring to:munch:

O, so one pup atop the other, but wired in phase?
 
tot_Ou_tard said:
The site says that the pups on the Eastwood RBC are P90s and that each of the three pups has a 3-way toggle switch: Off/On/Coil-Tap.

Why can't you just connect a wire, say, half-way through the windings and another at the end of the windings as usual. Depending on which is connected to the circuit you get a hotter, midrangy P90 sound or a thinner more standard single coil sound?

Some Schecter single coil pickups from the early 80s had this feature. I used to own a set. The tap is just what it says, a wire soldered somewhere along the winding. So basically the tap switch selects between a lower output "vintage" sound (less windings, part of the coil) and a hot overwound SC pickup sound (full coil).

tung
 
tunghaichuan said:
Some Schecter single coil pickups from the early 80s had this feature. I used to own a set. The tap is just what it says, a wire soldered somewhere along the winding. So basically the tap switch selects between a lower output "vintage" sound (less windings, part of the coil) and a hot overwound SC pickup sound (full coil).

tung
That was my guess. Did the vintage-thing work well, or did it only approximate the tone as tapped 'buckers are thought to do.
 
tot_Ou_tard said:
That was my guess. Did the vintage-thing work well, or did it only approximate the tone as tapped 'buckers are thought to do.

It worked as advertised. In one position the guitar was sc-vintage tone. In the other, hot overwound sc tone.

tung
 
tot_Ou_tard said:
Wow! Sounds cool, why haven't I heard of them before?

It's been a while since I owned those pickups, but it seems to me that the tonal difference wasn't that dramatic.

There is an entry in Guitar Electronics for Musicians by Donald Brosnac (published in 1983, ISBN: 0711902321) concerning Schecter and tapped pickups:

"Schecter Guitar Research is a young company which was founded by David Schecter in 1976. David has had extensive experience repairing and customizing Fender guitars and became very knowledgeable about pickup construction. He has worked with and refined tapped pickup design. Tapped pickups have two coil windings in continous series. The first, or inside winding, produces the original Fender sound, whereas the second winding in combination with the first, creates a new sound. The second sound is characterized by higher volume, more bass, and increased sustain." (P. 41)

tung
 
tunghaichuan said:
It's been a while since I owned those pickups, but it seems to me that the tonal difference wasn't that dramatic.

There is an entry in Guitar Electronics for Musicians by Donald Brosnac (published in 1983, ISBN: 0711902321) concerning Schecter and tapped pickups:



tung
That explains a lot. Thanks Tung!
 
Did some looking on the Eastwood site, very nice guitars and they are only 20 or so minutes away from where I live, I wrote the president to see if I could visit there facility.. I'll let you know if he writes back..maybe I could bring a camera and take a few snaps..
 
I can definately confirm that Shecters coil tap(s?) sounds better than other brands.
 
Jampy said:
Did some looking on the Eastwood site, very nice guitars and they are only 20 or so minutes away from where I live, I wrote the president to see if I could visit there facility.. I'll let you know if he writes back..maybe I could bring a camera and take a few snaps..
Excellent Jampy! Make sure you get to play some of those beauts.
 
Back
Top